Delfield CAB2-913ET Stainless Steel Enclosed Base 2 Stack Heated Mobile Plate Dish Dispenser for 8-1/8 to 9-1/8" Dishes

This CAB2-913 enclosed mobile heated dish dispenser by Delfield provides a safe and convenient way to get two (2) 24" tall stacks of up to 8.12 to 9.12"diameter of hot plates (or approximately 72 dishes) to your customers, allowing them to enjoy your cooking staff’s delicious creations for longer. There are two (2) dispensing tubes that quickly heat the plates at 120°F and 140°F using a 400-watt convection heating element and a fan motor. The air intake is also filtered to keep the plates inside and safe to use.

When you pick up the topmost, the self-leveling mechanism immediately moves up the next plate in the pile for easy access. You can remove or add stainless steel springs as needed depending on the weight of the plates in tow.  The dish carrier heads has welded rods and a removable 18-gauge top plate for easy spring adjustment. The dispensing tube can easily be turned on and off with the dedicated switch while a thermostat allows you to maintain proper temperature inside.

This two-stack dish dispenser is made of stainless steel for a reliable, easy-to-clean build. The flange features three (3) high-impact guideposts and is welded together with the vertical channels and bottom brace for heavy-duty weight support. You can haul the dishes effortlessly using the four (4) 4" swivel casters at the base of the unit. They are lockable to ensure the unit stays put when in use. There are also non-marring bumpers to prevent marks and any other damage to the unit itself and to other equipment or walls it passes during transport.

This Delfield two-stack dish dispenser comes with cUL, UL, and NSF certifications for safe use. It is rated at 11.0 Amps and requires 120v/60Hz/1 electrical connection. 9’ (2.7m) cord with NEMA 5-20P plug supplied.

Complete your setup with our top-quality food holding and warming equipment!

• Non-marring gray corner bumpers
• Spring supports to be 14-gauge S/S
• Field adjustable self-leveling mechanism
• (4) 4.00” locking polyolefin swivel casters
• One year parts and 90 day labor warranty
• Cabinet top to be 16-gauge stainless steel
• High impact plastic guide posts mounted to flange
• Outer body and corners to be 20-gauge stainless steel
• Dispenser flange, channels and bottom to be integrally welded
• Carrier head made of welded rods with a removable 18-gauge top plate
• Dispenser top flange, vertical side channels and bottom brace are stainless steel
• Heated, QT & ET Features
  • 9’ cord and plug
  • Air intake shall be filtered
  • On/off switch on each dispense
  • ET maintains 120-140°F (49-60°C)
  • QT maintains 150-170°F (66-77°C)
  • Adjustable thermostat per dispenser
  • QT- stainless steel cover per dispenser
  • 22-gauge stainless steel jacket around dispenser
  • Convection heating module and fan motor per dispenser

• Wrap-around bumpers
• Four 4” or 5” polyurethane casters
• Hold-down rod for dispenser tubes
• Flange-mount feet in lieu of casters
• Shorten dispenser tubes to special length
• 220 volt, 50/60 cycle, single phase electrical connections
• Stainless steel tube cover (-500 through -725 models only)
• Stainless steel dome cover (-813 through -1450 models only)
• 12” diameter S/S dish dispenser tray (-1200 and -1450 models only)
• Rods for oval dishes and diameter adjustment (-813 through -1450 only)
• Note: Inclusion of these options will alter the electrical specifications of unit