Beverage Air DD58HC-1-S 3 Taps 1/2 Barrel Draft Beer Cooler - Stainless Steel, 3 Kegs Capacity, 115 Volts

Beverage Air DD58HC-1-S Description

Draft Beer Cooler, 59"W, 29"D, 21.86 cu. ft., (2) doors, (3) keg capacity, door locks, (1) single & (1) dual faucet towers, stainless steel front & top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

The Beverage Air DD58HC-1-S Draft Beer Cooler is a dependable unit designed to stand up to the rigors of commercial use. The exterior is finished in stainless steel making it easy to clean and maintain. This unit has 21.86 cu. ft. of refrigerated space for three ½ kegs.

Inside this unit, the walls and ceiling are made from galvanized steel to save on weight while the floor and door sills are made from heavy-duty stainless steel to handle kegs being moved in and out. The doors are self-closing and have magnetic door gaskets to prevent them from being left open which can save on power costs. To make sure kegs are secure, all doors are locking. The towers are well insulated to keep beer cool and to reduce foaming. Each tower is 3” in diameter and made from durable stainless steel. The stainless steel top is extremely durable and comes with built-in drip trays to catch any spills. This unit features a 3-in-1 draft solution that allows different beverages to be served from a single tap. Silver-lined tubing is 100% effective at preventing the growth of the top four beverage spoiling bacteria.

A ¼ HP compressor provides 1702 BTU/hr of efficient cooling and can be ordered installed on either the right or left side of the unit to best fit your establishment’s needs. The interior temperature is kept between 36ºF and 38ºF by the fully electronic controls while an epoxy-coated evaporator makes sure the refrigeration system requires as little maintenance as possible while providing refrigeration you can rely on. To minimize downtime, this unit features an automatic non-electric defrost cycle. R290 Hydrocarbon refrigerant is used for efficient cooling that has a reduced negative effect on the environment.

An eight-foot power cord with a NEMA 5-15P plug set is wired at the factory to connect this unit to a standard outlet providing 115v/60/1-ph power at 2.5 amps.

Draft Beer Cooler, 59" W, 28-3/16" D, (2) doors, 23.8 cu. ft., (3) keg capacity, door locks, (1) single and (1) dual faucet towers, stainless steel front & top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, UL, cUL, UL EPH, NSF, MADE IN USA

• Cabinet Construction
  • Full electronic control
  • Field reversible doors
  • Self-closing doors with locks
  • 3” Insulated dispensing tower(s)
  • Magnetic gaskets provide positive door seal
  • Top and drip tray are heavy-duty stainless steel
  • Compressor available on left or right, specify at time of unit order
  • Two (2) draft arms, one (1) with single faucet and (1) with dual faucets
  • Exterior is wear resistant vinyl on steel in black or stainless steel finish
  • Drain tube located at bottom front of cooler or connection to floor drain
  • Interior is galvanized steel on walls and ceiling, reinforced floor and doorsills are heavy duty stainless steel
• Refrigeration System
  • Epoxy coated evaporator coil
  • Automatic, non-electric evaporator
  • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
  • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
• Options & Accessories
  • Wine taps
  • Turbo taps
  • Glass rinser
  • Faucet locks
  • Wine models
  • 1- 5 Tap tower
  • 2,3 & 4 way manifolds
  • Foot pedal door opener
  • Club top models available
  • No draft/hole cover options
  • Stainless steel external & internal available
  • 3”-6” casters or 6” legs with adjustable plate