Beverage Air DD78HC-1-B-12T 12 Taps 1/2 Barrel Draft Beer Cooler - Black, 4 Kegs Capacity, 115 Volts

Draft Beer Cooler, 79"W, 28-3/16"D, 33.59 cu. ft., (3) doors, (4) keg capacity, door locks, (12) tap tower, black exterior, stainless steel top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

Does your establishment need a twelve tap tower draft beer dispenser that will stand up to years of commercial use? The DD78HC-1-B-12T Draft Beer Cooler might be exactly what you need. This dispenser has 33.59 cu. ft. to store four ½ kegs.

To protect the floor and door sill inside this unit from the weight of kegs they’re made from durable stainless steel while the ceiling and walls are made from galvanized steel. All doos come standard with a lock for added security. The doors come with magnetic gaskets and are self-closing to make sure they’re closed securely. The twelve tap tower is well insulated to keep beer cool while keeping foam to a minimum. Each tower is 3” in diameter and made from durable stainless steel. The stainless steel top is extremely durable and comes with a built-in drip tray to catch any spills. This unit has a 3-in-1 draft solution that allows a single tap to be used for different beverages. This is made possible with silver-lined tubing that is 100% effective against the top four beverage spoiling bacteria.

This unit features a side-mounted refrigeration system with a ⅓ HP compressor producing 2392 BTU/hr of cooling. The compressor can be mounted on the left or right to best fit your needs. The fully electronic controls keep the interior between 36ºF and 38ºF as efficiently as possible while an epoxy-coated evaporator makes sure heat is exchanged reliably with minimal service. An automatic non-electric defrost system keeps the interior from frosting over while keeping downtime to a minimum. The refrigeration system utilizes R290 refrigerant which is an eco-friendly hydrocarbon that has a markedly reduced impact on the environment for safe, sustainable refrigeration.

Power is supplied to the unit with a factory wired 8-foot power cord with a NEMA 5-15P plug set to connect it to a standard outlet that provides 115v/60/1-ph power at 5.5 amps.

Draft Beer Cooler, 79" W, 28-3/16" D, 34.2 cu. ft., (3) doors, (4) keg capacity, door locks, (12) tap tower, black exterior, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA

• Cabinet Construction
  • Full electronic control
  • Field reversible doors
  • Two (2) dual tap towers
  • Self-closing doors with locks
  • 3” Insulated dispensing tower(s)
  • Magnetic gaskets provide positive door seal
  • Top is made from heavy-duty stainless steel including drip tray
  • Compressor available on left or right, specify at time of unit order
  • Exterior is wear resistant vinyl on steel in black or stainless steel finish
  • Drain tube located at bottom front of cooler or connection to floor drain
  • Interior is galvanized steel on walls and ceiling, reinforced floor is heavy duty stainless steel
• Refrigeration System
  • Epoxy coated evaporator coil 
  • Automatic, non-electric evaporator
  • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
  • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
• Options & Accessories
  • Wine taps
  • Turbo taps
  • Glass rinser
  • Faucet locks
  • Wine models
  • 1- 5 Tap tower
  • Low profile casters
  • Special 6/pan option
  • 2,3 & 4 way manifolds
  • Foot pedal door opener
  • No draft/hole cover option
  • Epoxy coated wire shelves
  • Stainless steel interior available
  • 3”-6” casters or 6” legs with adjustable plate