Everest Refrigeration EBD4-CT 4 Taps 1/2 Barrel Draft Beer Cooler - Black, 4 Kegs Capacity, 115 Volts

Everest Refrigeration EBD4-CT Description

Club Top Direct Draw Keg Refrigerator, three-section, 89-1/4"W, 32.0 cu. ft. capacity, self-contained side mounted refrigeration, (3) solid hinged doors (locking), holds (4) 1/2 barrel kegs, (1) sliding club top lid, (1) epoxy coated wire shelf, (2) 3" diameter insulated stainless steel draft towers (NSF) with air distributor, (2) faucets per tower, stainless steel countertop & lid, digital controls with LED display, auto defrost, LED interior lighting, textured & laminated black vinyl exterior, galvanized steel interior wall & stainless steel floor, exterior drain port for excess top tray moisture, drain hose not included, floor drain required, R290 Hydrocarbon refrigerant, 1/3 HP, 115v/60/1-ph, 2.5 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation

• Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
• Large capacity, corrosion-resistant condenser and evaporator coils.
• Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
• Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
• Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
• High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
• Side mounted R290 condensing unit uses environmentally friendly, EPA compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP).

• Compact, easy-access club top compartment.
• Built-in caster thread receptacles for all models.
• 1 3/4" thick high density polyurethane insulation.
• Galvanized steel interior walls and high quality stainless steel floor.
• Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.

• Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.

• Pre-installed door locks keep your items safe from theft.
• High strength door handles are recessed for doors and raised for club top lids.
• Snap-in magnetic door gasket make cleaning and replacement an easy process.
• Textured laminate, black vinyl exterior and galvanized steel interior with 1 3/4” thick high density polyurethane insulation for doors. Heavy duty stainless steel exterior and galvanized steel interior with 3/4” thick high density polyurethane insulation for cub top lids.

• Two dual faucet, 3" diameter, stainless steel draft arms with matching air distributors. Fully insulated and NSF
  certified.

• One epoxy coated, steel wire shelf.
• Height adjustable stainless steel clips.

• Multi-function digital controller with easy to read LED display.
• Audible overheat protection alarm for compressor and condenser coil.
• Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.

• 3” or 5” swivel casters with locks.
• 3.5” – 6” height-adjustable and interchangeable legs.
• Dual or triple faucet draft arms and matching air distributors.