Beverage Air DD78HC-1-B 4 Taps 1/2 Barrel Draft Beer Cooler - Black, 4 Kegs Capacity, 115 Volts
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air DD78HC-1-B Specifications
Number of Kegs | 4 Kegs |
---|---|
Number of Taps | 4 Taps |
Amps | 7.4 Amps |
Installation Type | Freestanding |
Construction | Stainless and Galvanized Steel |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Made in | USA |
Type | Beer Dispensers |
Certifications | cULus |
Number of Doors | 3 |
Exterior Finish | Black |
Door Type | Solid |
Sections | 3 |
Style | 1/2 Barrel |
Voltage | 115 Volts |
Width (in) | 79 |
Height (in) | 52.5 |
Depth (in) | 29 |
Weight | 400.00 |
Additional Information on Beverage Air DD78HC-1-B
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air DD78HC-1-B Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air DD78HC-1-B Description
Draft Beer Cooler, 79"W, 29"D, 33.59 cu. ft., (3) doors, (4) keg capacity, door locks, (2) dual faucet towers, black exterior, stainless steel top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USAThe DD78HC-1-B Draft Beer Cooler from Beverage Air is a good choice if your establishment needs an easy to use draft beer solution and don’t want to run remote lines from back-of-house to your bar. This unit has 33.59 cu. ft. of cold storage to hold four ½ kegs.
To protect the floor and door sill inside this unit from the weight of kegs they’re made from durable stainless steel while the ceiling and walls are made from galvanized steel. All doos come standard with a lock for added security. The doors come with magnetic gaskets and are self-closing to make sure they’re never accidentally left ajar. This unit comes with two 3” dispensing towers with a total of four taps. The stainless steel towers are insulated to make sure the beer in the tower is nice and cool preventing waste while reducing foaming. The top of the unit is made from stainless steel and includes a drip tray to catch any spills. The drip tray is internally routed to a drain tube at the bottom of the unit to empty into a floor drain. Beverage Air uses silver-lined tubing that is 100% effective against the top 4 beverage spoiling bacteria. This allows for a 3-in-1 draft solution that allows a single tap to be used for different beverages.
A ⅓ HP compressor producing 2392 BTU/hr of cooling is housed in either the left or right side of the unit to best fit your requirements. The temperature inside is maintained between 36ºF and 38ºF by the fully electronic controls. An epoxy-coated evaporator coil makes sure efficient cooling will be provided for many years with minimal service. The refrigeration system uses eco-friendly R290 hydrocarbon refrigerant that meets all environmental standards. The unit is kept free of frost by an automatic non-electric defrost function that keeps downtime to a minimum.
Draft Beer Cooler, 79" W, 28-3/16" D, 34.2 cu. ft., (3) doors, (4) keg capacity, door locks, (2) dual faucet towers, black exterior, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, cULus, UL EPH Classified, UL-Sanitation, MADE IN USAStandard Features:
- Cabinet Construction
- Full electronic control
- Field reversible doors
- Two (2) dual tap towers
- Self-closing doors with locks
- 3” Insulated dispensing tower(s)
- Magnetic gaskets provide positive door seal
- Top is made from heavy-duty stainless steel including drip tray
- Compressor available on left or right, specify at time of unit order
- Exterior is wear resistant vinyl on steel in black or stainless steel finish
- Drain tube located at bottom front of cooler or connection to floor drain
- Interior is galvanized steel on walls and ceiling, reinforced floor is heavy duty stainless steel
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wine taps
- Turbo taps
- Glass rinser
- Faucet locks
- Wine models
- 1- 5 Tap tower
- Low profile casters
- Special 6/pan option
- 2,3 & 4 way manifolds
- Foot pedal door opener
- No draft/hole cover option
- Epoxy coated wire shelves
- Stainless steel interior available
- 3”-6” casters or 6” legs with adjustable plate
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Beverage Air DD78HC-1-B Accessories
Beverage Air DD78HC-1-B Reviews
There are no reviews yet for this product.