Beverage Air DD68HC-1-C-B 2 Taps 1/2 Barrel Draft Beer Cooler - Black, 3 Kegs Capacity, 115 Volts

Beverage Air DD68HC-1-C-B Description

Draft Beer Cooler, Club Top, 69"W, 28-3/16"D, 25.93 cu. ft., (2) doors, (2) slide back lids - (1) with shelf & (1) with basket, (3) keg capacity, door locks, (2) single faucet columns, black exterior, stainless steel top, galvanized interior with reinforced stainless steel floor, column type beer faucets, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

If you want a versatile beer cooler that covers all the bases the DD68HC-1-C-B Draft Beer Cooler from Beverage Air should be a the top of your list. This club top model makes serving the perfect glass of beer simple and convenient. The interior of this dispenser has 25.93 cu. ft. of refrigerated space for three ½ kegs.

The interior walls and ceiling are made from galvanized steel while the door sill and floor are made from durable stainless steel to bear the weight of kegs being moved in and out. To keep kegs inside cool and save on power, the doors are self-closing with magnetic door seals to keep them closed. The doors come standard with locks to keep kegs secure. The 3" stainless steel dispensing towers on this unit are insulated to prevent beer from foaming and make sure each glass is served as cold as possible. The top is made from durable stainless steel and comes with built-in drip tray.s that connect to a floor drain through internal routing. 

Beverage Air’s 3-in-1 draft solution makes it possible to serve different beverages with a single tap. This is made possible with silver-lined tubing. Silver is a natural anti-microbial element and is 100% effective against the top 4 beverage spoiling bacteria. Two sliding stainless steel lids provide convenient access to glasses, bottles, or cans that are kept cool and ready to serve from within arm’s reach.

This unit has a side-mounted self-contained refrigeration system that provides efficient cooling with a ⅓ HP compressor that produces 2392 BTU/hr of cooling. The refrigeration system can be on the left or right based on your installation needs. To make sure the refrigeration system will run reliably for many years the evaporator coil features an epoxy coating. This along with the fully electronic controls make sure the temperature inside stays between 36ºF and 38ºF while drawing as little power as possible. To meet all environmental regulations this unit uses R290 hydrocarbon refrigerant that minimizes negative effects on the atmosphere. An automatic non-electric defrost system provides convenience and minimizes downtime.

The unit comes prewired from the factory with an 8-foot power cord and a NEMA 5-15P plug set to easily connect it to a standard outlet with 115v/60/1-ph power.

Draft Beer Cooler, Club Type, 69" W, 28-3/16" D, 28.4 cu. ft., (2) doors, (2) slide back lids - (1) with shelf and (1) with basket, (3) keg capacity, door locks, (2) single faucet columns, black exterior, stainless steel top, galvanized interior, column type beer faucets, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, UL, cUL, UL EPH, NSF, MADE IN USA

• Cabinet Construction
  • Full electronic control
  • Field reversible doors
  • Self-closing doors with locks
  • 3” Insulated dispensing tower(s)
  • Magnetic gaskets provide positive door seal
  • Top and drip tray are heavy-duty stainless steel
  • Compressor available on left or right, specify at time of unit order
  • Exterior is wear resistant vinyl on steel in black or stainless steel finish
  • Drain tube located at bottom front of cooler or connection to floor drain
  • Two (2) draft arms, one (1) with single faucet and one (1) with dual faucets
  • Interior is galvanized steel on walls and ceiling, reinforced floor and doorsills are heavy duty stainless steel
• Refrigeration System
  • Epoxy coated evaporator coil
  • Automatic, non-electric evaporator
  • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
  • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
• Options & Accessories
  • Wine taps
  • Turbo taps
  • Glass rinser
  • Faucet locks
  • Wine models
  • 1-5 Tap tower
  • Low profile casters
  • 2,3 & 4 way manifolds
  • Foot pedal door opener
  • Special 6 tap/pan option
  • No draft/hole cover option
  • Club top models available
  • Epoxy coated wire shelves kit
  • Stainless steel exterior & interior available
  • 3”-6” casters or 6” legs with adjustable plate