Beverage Air DD24HC-1-S 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 1 Keg Capacity, 115 Volts
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air DD24HC-1-S Specifications
Number of Kegs | 1 Keg |
---|---|
Number of Taps | 1 Tap |
Amps | 4 Amps |
Installation Type | Portable |
Construction | Stainless and Galvanized Steel |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Number of Doors | 1 |
Made in | USA |
Type | Beer Dispensers |
Certifications | cULus |
Exterior Finish | Stainless Steel |
Door Type | Solid |
Sections | 1 |
Style | 1/2 Barrel |
Voltage | 115 Volts |
Width (in) | 24 |
Height (in) | 53 |
Depth (in) | 30.13 |
Weight | 184.00 |
Additional Information on Beverage Air DD24HC-1-S
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air DD24HC-1-S Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air DD24HC-1-S Description
Draft Beer Cooler, 24"W, 30-1/8"D, 7.66 cu. ft., (1) door, (1) keg capacity, door locks, one single faucet column, stainless steel exterior, stainless steel top, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, 4" casters, R290 Hydrocarbon refrigerant, 1/6 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USAIf your establishment needs to serve beer or other beverages from a portable platform the Beverage Air DD24HC-1-S Draft Beer Cooler is a great solution. With its 4” casters moving it to where it’s needed is as easy as can be. The interior has 7.66 cu. ft. of refrigerated storage for a single ½ keg.
The interior is accessed through a self-closing door with a lock for security. Magnetic door gaskets are included to make sure an airtight seal is maintained The walls and ceiling are made from galvanized steel to save on weight while the floor and door sill feature heavy-duty stainless steel construction to bear the weight of kegs. The top of the unit is made from heavy-duty stainless steel and features a drip tray to catch any spills. The drip tray drains through a drain tube at the bottom of the unit to empty into a floor drain. To keep the beer from foaming the 3” stainless steel dispensing tower is insulated.
Cooling is provided by a self-contained refrigeration system utilizing a ⅙ HP compressor that provides 1094 BTU/hr of cooling. The epoxy-coated evaporator in this unit makes sure efficient cooling is provided in a reliable manner for many years with minimal service. Fully electric controls will keep the temperature between 36ºF and 38ºF while consuming as little power as possible. The refrigeration system uses eco-friendly R290 hydrocarbon refrigerant that meets all environmental standards. The unit is kept free of frost by an automatic non-electric defrost function that keeps downtime to a minimum.
Power is provided to the unit with the 8’ power cord that comes prewired from the factory with a NEMA 5-15P plug set for use with a standard outlet with 115v/60/1-ph power at 2.0 amps.
Draft Beer Cooler, 24" W, 29-1/2" D, 7.8 cu. ft., (1) door, (1) keg capacity, door locks, one single faucet column, stainless steel exterior, stainless steel top, galvanized interior, self-contained refrigeration, 4" casters, R290 Hydrocarbon refrigerant, 1/5 hp, UL, cUL, UL EPH, NSF, MADE IN USAStandard Features:
- Cabinet Construction
- Single draft arm
- Field reversible door
- Full electronic control
- Self-closing door with lock
- 3” Insulated dispensing tower(s)
- Four-inch (4”) heavy duty casters standard
- Magnetic gaskets provide positive door seal
- Top is made from heavy-duty stainless steel including drip tray
- Compressor available on left or right, specify at time of unit order
- Exterior is wear resistant vinyl on steel in black or stainless steel finish
- Drain tube located at bottom front of cooler or connection to floor drain
- Interior is galvanized steel on walls and ceiling, reinforced floor and doorsill are heavy duty stainless steel
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wine taps
- Turbo taps
- Glass rinser
- Faucet locks
- Wine models
- 1-4 Tap tower
- Leg accessory kits
- 2, 3 & 4 way manifolds
- Dial/digital thermometer
- Club top models available
- Stainless steel interior available
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Beverage Air DD24HC-1-S Accessories
Beverage Air DD24HC-1-S Reviews
There are no reviews yet for this product.