Southbend HDG-72 72'' Countertop Gas Griddle with Thermostatic Controls - 180,000 BTU
MPN#: HDG-72
1/2
Free Freight?
Quick Ship
$14,183.00 /
Calculate
Product Protection
Starting at
Southbend HDG-72 Specifications
| Plate Thickness | 1 Inch |
|---|---|
| Total BTU | 157000 - 240000 |
| Installation Type | Countertop |
| Power Type | Natural or Propane Gas |
| Cooking Surface Material | Polished Steel |
| Construction | Stainless Steel |
| Burner Style | Tube |
| With Griddle | Yes |
| Brand | Southbend |
| Number of Burners | 2 |
| Certifications | NSF |
| BTU | 180,000 BTU |
| Control Type | Thermostatic |
| Heat | Gas |
| Usage | Standard Duty |
| Width (in) | 72 |
| Height (in) | 16.13 |
| Depth (in) | 33.75 |
| Weight | 840.00 |
Additional Information on Southbend HDG-72
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Southbend HDG-72 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Southbend HDG-72 Description
Griddle, countertop, gas, 72" W x 24" D cooking surface, 1" thick polished steel plate, thermostatic controls, battery spark ignition, flame failure safety device, stainless steel front, sides & 4" adjustable legs, 180,000 BTU, CSA, NSF
Commercial Countertop Griddle, gas, 72" W x 24" D cooking surface, 1" thick polished steel plate, thermostatic controls, battery spark ignition, stainless steel front, sides & 4" adjustable legs, 180,000 BTU, CSA, NSF (more flat top grills & griddles, countertop ranges, commercial grills, and other cooking equipment available)
Standard Features:
Standard Features:
- Protected flue opening
- Electronic spark ignition (battery)
- 1” thick polished rolled steel plate
- Grease drawers with large capacity
- 5” high rear and 4” side splash guards
- Each burner equipped with runner tube
- Reinforced, insulated double wall sides
- 3/4” rear gas connection and pressure regulator
- Available in 18”, 24”, 36”, 48”, 60” and 72” widths
- Fully welded griddle plate with protected exhaust vent
- 20,000 BTU (NAT or LP) burner per 12” Manual Models
- 30,000 BTU (NAT or LP) burner per 12” Thermostatic Models
- Exclusive “NO COLD” Zone -Uniform heat distribution across surface
- Stainless steel front, vent and sides are standard, rear and bottom panels are aluminized steel.
Standard Features of Thermostatic Griddle Models
- Flame failure safety device
- Embedded load sensing thermostat
- “Instant-on” thermostatic controls for precise settings between 200°F and 400°F
Options & Accessories
- Casters for stand
- Stainless steel stand
- Grooved griddle plates
- Chrome plated griddle plates
- Stainless steel plate shelf with or without cutting board
- 2” high insulator base for mounting on refrigerated base
Standard Construction Specifications
Exterior Finish: Front, sides and vent are constructed of #3 polished 430 and 304 stainless steel. Bottom and rear are aluminized steel. Sides are reinforced and fully insulated. 5” rear and 4” side splash. Griddle Plate: 18”, 24”, 36”, 48”, 60”, 72” wide unit with one 30,000 BTU (NAT or LP) burners every 12” on thermostatic models and one 20,000 BTU (NAT or LP) burners every 12” on manual models. Fully welded, 1” thick polished steel griddle plate with side splash guards, and grease drawer. Griddle Controls: Independent, “Instant-on” thermostatic controls with uniform temperature range of 200°F to 400°F. (Thermostatic models ONLY) Legs: Stainless steel 4” adjustable legs. Gas Heat Control System: Each foot of griddle is heated by a “U” shaped burner. Each burner is controlled by a thermostatic control. For safety, each pilot has a flame failure device. A 3/4” rear gas connection is standard. Units over 48” wide are constructed of two bodies. (Thermostatic models ONLY)
Videos
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Southbend HDG-72 Accessories
Southbend HDG-72 Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Southbend HDG-72 to Other Products
Rating
Price
Width (in)
Depth (in)
Usage
Construction
Number of Burners
Control Type
BTU
Price
$14,183.00 72
33.75
Standard Duty
Stainless Steel
2
Thermostatic
180,000 BTU
Price
$14,185.50 60
37.8
Standard Duty
Stainless Steel
5
Thermostatic
150,000 BTU
Price
$16,445.00 36
33.1
Heavy Duty
Stainless and Aluminized Steel
3
Thermostatic
90,000 BTU
Price
$14,109.00 48
31.5
Heavy Duty
Stainless and Aluminized Steel
4
Mechanical
108,000 BTU
Price
$14,741.65 48.3
32.3
Heavy Duty
Stainless Steel
1
Digital
85,000 BTU
Price
$14,741.65 48.25
32.3
Heavy Duty
Stainless Steel
1
Digital
85,000 BTU
Items Related to Southbend HDG-72
Commercial Turners 526 products
Commercial Countertop Griddles 853 products
Countertop Ranges 1642 products
Flat Top Grills & Commercial Griddles 859 products
Commercial Grills 1370 products
