Delfield DIS-813-ET Heated Shielded Round Drop-In Dish Dispenser for 7 1/4" to 8-1/8" Dishes

Made to fit in 28" high spaces in the kitchen, the DIS-813-ET drop-in even-temp heated dish dispenser seamlessly adds a consolidated storage, heating, and dispensing station to your setup. This unit can hold dishware measuring 7.25 to 8.12" in diameter. It can store up to 72 dishes or a maximum stack height of 24". The dispensing tube is evenly heated at 120°F to 140°F using a 400-watt convection module heating element with a fan motor. 

The tube can be easily switched on and off while a thermostat allows you to set the temperature. for ease of operation and flexibility. The stack automatically raises after the top plate is removed for immediate access to clean, hot plates. 

This drop-in dish dispenser tube features all stainless steel vertical side channels, bottom brace, and top flange, making it super easy to clean and reliably sturdy. The stainless steel welded rods with stainless steel top plate enhance the unit’s durability. Three (3) high-impact guideposts are mounted on the flange to keep the stack of plates from wobbling or falling off. Stainless steel spring supports can be removed so you can set the proper tension and height of the existing stack.

This Delfield drop-in even-temp dish dispenser comes with cUL, UL, and NSF certifications. It is rated at  5.5 amps and requires a 120/60/1 electrical connection. A 4' (2.7m) cord with NEMA 5-15P plug is supplied. Enjoy a one-year parts warranty and a 90-day labor standard warranty.

Shop more premium-quality food holding and warming equipment only here at CKitchen!

• Spring supports to be stainless steel
• High impact plastic guide posts mounted to flange
• One year parts and 90 day labor standard warranty
• Flange, channels and bottom to be integrally welded
• Carrier head made of welded rods with a removable top plate
• Top flange, bottom brace and vertical side channels are stainless steel
• Self-leveling mechanism, field adjustable by adding or removing springs
• DIS-ET/QT Series Only
  • 4’ cord and plug
  • Filtered air intake
  • Outer stainless steel jacket
  • QT- Shall have a stainless steel cover
  • On/off switch and adjustable thermostat
  • Convection heating module and fan motor
  • ET temperature range is 120-140°F (49-60°C)
  • QT temperature range is 150-170°F (66-77°C)

• Special voltages
• Hold-down rod for dispenser tubes
• Shorten dispenser tubes to special length
• Stainless steel tube cover (500-725 sizes only)
• Stainless steel outer jacket for dispenser tubes-non-heated (standard on ET or QT)
• Non-marring adjustment rods for oval dishes and various dish diameters (813–1450 sizes only)
• Stainless steel dome cover with access to dishes (813-1450 sizes only; standard on QT models)
• 12.00” (30cm) dia. stainless steel dish dispenser tray (DIS-1200, DIS-1200-ET and DIS-1200-QT only)