Beverage Air DD72HC-1-S 4 Taps 1/2 Barrel Draft Beer Cooler - Stainless Steel, 3 Kegs Capacity, 115 Volts

Beverage Air DD72HC-1-S Description

Draft Beer Cooler, 72"W, 24-3/8"D, 19.95 cu. ft., (3) doors, (3) keg capacity, door locks, (2) dual angle faucet columns, stainless steel exterior, stainless steel top & drip tray, galvanized interior with reinforced stainless steel floor walls & ceiling with stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

If your establishment needs a reliable draft beer station the DD72HC-1-S Draft Beer Cooler from Beverage Air is an easy pick. With 19.95 cu. ft. of capacity it can store three ½ kegs.

The self-closing doors and magnetic door gaskets on this unit prevent excessive power draw while keeping kegs as cold as possible. Door locks come standard for security. The interior features galvanized steel construction for the walls and ceiling and the floor and door sill are made from durable stainless steel. This unit has a stainless steel top with built-in drip trays to catch spills. The drip trays connect to a drain tube at the bottom of the unit to empty into a floor drain. Beer served from this unit is always nice and cool without too much foam thanks to the insulated 3" stainless steel dispensing towers with a total of four taps. This unit has a 3-in-1 draft solution that allows a single tap to be used for different beverages. This is made possible with silver-lined tubing that is 100% effective against the top four beverage spoiling bacteria.

The side-mounted refrigeration system provides efficient cooling and can be located on either the left or right of the unit based on your needs. The ⅓ HP compressor produces 1942 BTU/hr of cooling. The unit's epoxy-coated evaporator keeps the interior between 36ºF and 38ºF reliably with minimal maintenance while fully electronic controls reduce power consumption and stress on the refrigeration system to a minimum. The interior is kept free of frost with an automatic non-electric defrost system that cuts down on downtime. To meet all environmental regulations, R290 refrigerant is used.

Connecting this unit to a standard 115v/60/1-ph power outlet is simple with the factory wired 8’ power cable with a NEMA 5-15P plug set.

Draft Beer Cooler, 72" W, 23-1/2" D, 19.4 cu. ft., (3) doors, (3) keg capacity, door locks, (2) dual angle faucet columns, stainless steel exterior, stainless steel top, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 hp, UL, cUL, UL EPH, MADE IN USA

• Cabinet Construction
  • Two dual tap towers
  • Full electronic control
  • Field reversible doors
  • Self-closing doors with locks
  • 3” Insulated dispensing tower(s)
  • Magnetic gaskets provide positive door seal
  • Top is made from heavy-duty stainless steel including drip tray
  • Compressor available on left or right, specify at time of unit order
  • Exterior is wear resistant vinyl on steel in black or stainless steel finish
  • Drain tube located at bottom front of cooler or connection to floor drain
  • Interior is galvanized steel on walls and ceiling, reinforced floor is heavy duty stainless steel
• Refrigeration System
  • Epoxy coated evaporator coil
  • Automatic, non-electric evaporator
  • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
  • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
• Options & Accessories
  • Wine taps
  • Turbo taps
  • Glass rinser
  • Faucet locks
  • Wine models
  • 1-5 Tap tower
  • 2, 3 & 4 way manifolds
  • Foot pedal door opener
  • Special 6 tap/pan option
  • No draft/hole cover option
  • Epoxy coated wire shelves
  • Stainless steel exterior & interior available
  • 3”-6” casters or 6” legs with adjustable plate