Beverage Air DD50HC-1-S 2 Taps 1/2 Barrel Draft Beer Cooler - Stainless Steel, 2 Kegs Capacity, 115 Volts
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air DD50HC-1-S Specifications
Number of Kegs | 2 Kegs |
---|---|
Number of Taps | 2 Taps |
Amps | 7.4 Amps |
Installation Type | Built-In |
Construction | Stainless and Galvanized Steel |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Made in | USA |
Type | Beer Dispensers |
Certifications | cULus |
Number of Doors | 2 |
Exterior Finish | Stainless Steel |
Door Type | Solid |
Sections | 2 |
Style | 1/2 Barrel |
Voltage | 115 Volts |
Width (in) | 50.5 |
Height (in) | 52.5 |
Depth (in) | 29 |
Weight | 310.00 |
Additional Information on Beverage Air DD50HC-1-S
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air DD50HC-1-S Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air DD50HC-1-S Description
If your business needs a convenient draft beer dispenser the DD50HC-1-S Draft Beer Cooler from Beverage Air might be exactly what you’re looking for. With its stainless steel exterior finish, it’s easy to clean and maintain. The interior of this unit has 17.86 cu. ft. to hold two ½ kegs.
The kegs inside are kept safe with self-closing doors with locks for security. Magnetic door gaskets are included to provide a secure seal. The interior walls and ceiling are made from galvanized steel while the floor and door sill feature reinforced stainless steel construction. The 3" stainless steel dispensing tower on this unit is insulated to prevent beer from foaming and makes sure it's nice and frosty. The top is made from durable stainless steel and comes with a built-in drip tray. that connects to a floor drain through internal routing.
A ¼ HP compressor producing 1702 BTU/hr of cooling is housed in either the left or right side of the unit to best fit your requirements. The epoxy-coated evaporator in this unit makes sure efficient cooling is provided in a reliable manner for many years with minimal service. Fully electric controls will keep the temperature between 36ºF and 38ºF while consuming as little power as possible. An automatic non-electric defrost system keeps the interior from frosting over while keeping downtime to a minimum. The refrigeration system utilizes R290 refrigerant which is an eco-friendly hydrocarbon that has a markedly reduced impact on the environment for safe, sustainable refrigeration.
This unit ships from the factory with an 8-foot power cord with a NEMA 5-15P plug set to connect it to a standard 115v/60/1-ph power outlet.
Standard Features:
- Cabinet Construction
- Full electronic control
- Field reversible doors
- Self-closing doors with locks
- Magnetic gaskets provide positive door seal
- 3” Insulated dispensing tower(s) with dual draft arm
- Top is made from heavy-duty stainless steel including drip tray
- Compressor available on left or right, specify at time of unit order
- Exterior is wear resistant vinyl on steel in black or stainless steel finish
- Drain tube located at bottom front of cooler or connection to floor drain
- Interior is galvanized steel on walls and ceiling, reinforced floor and doorsill are heavy duty stainless steel
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wine taps
- Turbo taps
- Glass rinser
- Faucet locks
- Wine models
- 1-5 Tap tower
- Low profile casters
- 2,3 & 4 way manifolds
- Foot pedal door opener
- Club top models available
- No draft/hole cover option
- Stainless steel interior available
- 3”-6” casters or 6” legs with adjustable plate
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Beverage Air DD50HC-1-S Accessories
Beverage Air DD50HC-1-S Reviews
There are no reviews yet for this product.