Beverage Air DD68HC-1-S 3 Taps 1/2 Barrel Draft Beer Cooler - Stainless Steel, 3 Kegs Capacity, 115 Volts
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air DD68HC-1-S Specifications
Number of Kegs | 3 Kegs |
---|---|
Number of Taps | 3 Taps |
Amps | 7.4 Amps |
Installation Type | Freestanding |
Construction | Stainless and Galvanized Steel |
Brand | Beverage Air |
Refrigerant Type | R-290 |
Made in | USA |
Type | Beer Dispensers |
Certifications | cULus |
Number of Doors | 2 |
Exterior Finish | Stainless Steel |
Door Type | Solid |
Style | 1/2 Barrel |
Voltage | 115 Volts |
Width (in) | 69 |
Height (in) | 52.5 |
Depth (in) | 29 |
Weight | 379.00 |
Additional Information on Beverage Air DD68HC-1-S
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air DD68HC-1-S Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air DD68HC-1-S Description
Draft Beer Cooler, 69"W, 29"D, 25.93 cu. ft., (2) doors, (3) keg capacity, door locks, (1) single & (1) dual faucet towers, stainless steel top & front, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USAIf you want to serve nice cold beer from a dependable and convenient platform the DD68HC-1-S Draft Beer Cooler from Beverage Air should be on your shortlist. This dispenser is designed to hold three ½ kegs in its 25.93 cu. ft. interior.
This unit features self-closing doors that come standard with locks for security. The interior walls and ceiling are made from galvanized steel while the floor and door sill are reinforced with durable stainless steel to handle kegs. This unit comes with two 3” dispensing towers. The stainless steel towers are insulated to make sure the beer in the tower is nice and cool preventing waste while reducing foaming. The top of the unit is made from stainless steel and includes a drip tray to catch any spills. The drip tray is internally routed to a drain tube at the bottom of the unit to empty into a floor drain. For added versatility, this unit features a 3-in-1 draft solution. With the use of silver-lined tubing, different beverages like wine, coffee, and beer can be served from a single tap. Silver is naturally anti-microbial and is 100% effective against the top 4 bacteria that spoil beverages.
Cooling is provided by a side-mounted refrigeration system utilizing a ⅓ HP compressor that provides 2392 BTU/hr of cooling. To best fit your establishment the refrigeration system can be ordered on either side. The interior is kept at a temperature between 36ºF and 38ºF by the fully electronic controls. An epoxy-coated evaporator coil will make sure reliable refrigeration with minimal maintenance can be provided for years to come. The non-electric automatic defrost cycle keeps the unit running efficiently while keeping downtime to a minimum. R290 refrigerant is eco-friendly and provides efficient cooling while meeting all regulations.
This unit uses standard 115v/60/1-ph power at 5.5 amps and comes pre-wired with an 8-foot power cable and a NEMA 5-15P plug set.
Draft Beer Cooler, 69" W, 28-3/16" D, 28.4 cu. ft., (2) doors, (3) keg capacity, door locks, (1) single and (1) dual faucet towers, stainless steel top & front, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, UL, cUL, UL EPH, NSF, MADE IN USAStandard Features:
- Cabinet Construction
- Full electronic control
- Field reversible doors
- Self-closing doors with locks
- 3” Insulated dispensing tower(s)
- Magnetic gaskets provide positive door seal
- Top and drip tray are heavy-duty stainless steel
- Compressor available on left or right, specify at time of unit order
- Exterior is wear resistant vinyl on steel in black or stainless steel finish
- Drain tube located at bottom front of cooler or connection to floor drain
- Two (2) draft arms, one (1) with single faucet and one (1) with dual faucets
- Interior is galvanized steel on walls and ceiling, reinforced floor and doorsills are heavy duty stainless steel
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wine taps
- Turbo taps
- Glass rinser
- Faucet locks
- Wine models
- 1-5 Tap tower
- Low profile casters
- 2,3 & 4 way manifolds
- Foot pedal door opener
- Special 6 tap/pan option
- No draft/hole cover option
- Club top models available
- Epoxy coated wire shelves kit
- Stainless steel exterior & interior available
- 3”-6” casters or 6” legs with adjustable plate
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Beverage Air DD68HC-1-S Accessories
Beverage Air DD68HC-1-S Reviews
There are no reviews yet for this product.