1 (800) 555-0666

Beverage Air DD50HC-1-C-S 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 2 Kegs Capacity, 115 Volts

SKU#: DD50HC-1-C-S
Made in USA
Free Freight?
Quick Ship
$5,094.05
$4,445.08
or enjoy small payments $95.52/mo.
Lease Payment Calculate
Product Protection
Product Protection
Starting at
Reward Points
Reward Points
You will earn 5094
  • 2023 model, meets the newest EPA and DOE codes.

Beverage Air DD50HC-1-C-S Specifications

Number of Taps1 Tap
Number of Kegs2 Kegs
Amps7.4 Amps
Installation TypeBuilt-In
ConstructionStainless and Galvanized Steel
BrandBeverage Air
Refrigerant TypeR-290
Made inUSA
TypeBeer Dispensers
CertificationscULus
Number of Doors2
Exterior FinishStainless Steel
Door TypeSolid
Sections2
Style1/2 Barrel
Voltage115 Volts
Width (in)50.5
Height (in)52.5
Depth (in)29
Weight320.00

Additional Information on Beverage Air DD50HC-1-C-S

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Beverage Air DD50HC-1-C-S Certifications

cULus

cULus

UL (Underwriters Laboratories) approval for the US and Canada

UL

UL

UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

UL EPH

UL EPH

Certifies that the goods conform to public health and environmental quality compatibility requirements.

UL EPH Classified

UL EPH Classified

This product complies with UL EPH standards and meets ANSI/NSF requirements.

UL-Sanitation

UL-Sanitation

This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

Beverage Air DD50HC-1-C-S Description

Draft Beer Cooler, Club Top, 50-1/2"W, 29"D, 17.86 cu. ft., (2) doors, (1) slide back lid with (1) shelf, (2) keg capacity, door locks, (1) dual faucet tower, stainless steel top & front, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA

The DD50HC-1-C-S Draft Beer Cooler from Beverage Air is a club top model that comes with a stainless steel exterior finish that is easy to clean and maintain. The interior of this dispenser has 17.86 cu. ft. of refrigerated space for two ½ kegs.

The unit features self-closing doors and magnetic door gaskets to make sure the doors are never left ajar and a positive seal is maintained to reduce power consumption. The doors come standard with locks to keep kegs inside safe. The interior walls and ceiling are made from galvanized steel while the floor and door sill are made from durable stainless steel. The 3" stainless steel dispensing tower on this unit is insulated to prevent beer from foaming and makes sure it's nice and frosty. The top is made from durable stainless steel and comes with a built-in drip tray. that connects to a floor drain through internal routing.

With this unit’s 3-in-1 draft solution it can serve multiple beverages such as wine, coffee or beer through a single tap. The system uses silver-lined tubing that is 100% effective at preventing the growth of the top 4 beverage spoiling bacteria. The club top on this unit features a stainless steel lid that easily glides to reveal a basket and an epoxy-coated shelf for easy to reach storage of glasses, cans or bottles.

A ¼ HP compressor producing 1702 BTU/hr of cooling is housed in either the left or right side of the unit to best fit your requirements. The temperature inside is maintained between 36ºF and 38ºF by the fully electronic controls. An epoxy-coated evaporator coil makes sure efficient cooling will be provided for many years with minimal service. A non-electric automatic defrost cycle keeps the refrigeration system running efficiently while keeping downtime to a minimum. Eco-friendly R290 refrigerant is used by this unit to meet all environmental regulations.

Power is supplied to the unit with a factory wired 8-foot power cord with a NEMA 5-15P plug set to connect it to a standard outlet that provides 115v/60/1-ph power at 2.5 amps.

Beverage Air DD50HC-1-C-S 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 2 Kegs Capacity, 115 Volts

Draft Beer Cooler, Club Type, 50-1/2" W, 28-3/16" D, 19.8 cu. ft., (2) doors, (1) slide back lid with (1) shelf, (2) keg capacity, door locks, (1) dual faucet tower, stainless steel top & front, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 hp, UL, cUL, UL EPH, NSF, MADE IN USA

Standard Features:
  • Cabinet Construction
    • Full electronic control
    • Field reversible doors
    • Self-closing doors with locks
    • Magnetic gaskets provide positive door seal
    • 3” Insulated dispensing tower(s) with dual draft arm
    • Top is made from heavy-duty stainless steel including drip tray
    • Compressor available on left or right, specify at time of unit order
    • Exterior is wear resistant vinyl on steel in black or stainless steel finish
    • Drain tube located at bottom front of cooler or connection to floor drain
    • Interior is galvanized steel on walls and ceiling, reinforced floor and doorsill are heavy duty stainless steel
  • Refrigeration System
    • Epoxy coated evaporator coil
    • Automatic, non-electric evaporator
    • Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
    • Refrigeration system uses R290 refrigerant to comply with all environmental concerns
  • Options & Accessories
    • Wine taps
    • Turbo taps
    • Glass rinser
    • Faucet locks
    • Wine models
    • 1-5 Tap tower
    • Low profile casters
    • 2,3 & 4 way manifolds
    • Foot pedal door opener
    • Club top models available
    • No draft/hole cover option
    • Stainless steel interior available
    • 3”-6” casters or 6” legs with adjustable plate

Options for Beverage Air DD50HC-1-C-S

Wine thermostat
Compressor location
Refrigeration
Stainless steel options
What is included
  • Voltage: 115v/60/1-ph, 2.5 amps, cord with NEMA 5-15P
  • Door construction: Solid hinged stainless steel doors, standard
  • Warranty: 7 year parts & labor and 7 year compressor warranty (excludes maintenance items)

Videos

NOTE! This is a general product line video and does not necessarily reflect the listed model.

Beverage Air DD50HC-1-C-S 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 2 Kegs Capacity, 115 Volts

Beverage Air DD50HC-1-C-S Parts

All Beverage Air DD50HC-1-C-S Parts

Beverage Air DD50HC-1-C-S Reviews

There are no reviews yet for this product.

Questions and Answers

Compare Beverage Air DD50HC-1-C-S to Other Products

Rating
Price
Width (in)
Depth (in)
Exterior Finish
Height (in)
Number of Taps
Number of Kegs
Style
Voltage
Certifications
Rating
 
Price
$5,094.05 $4,445.08
50.5
29
Stainless Steel
52.5
1 Tap
2 Kegs
1/2 Barrel
115 Volts
cULus
Rating
 
Price
$4,439.42 $4,439.42
58.75
27.25
Stainless Steel
37.13
2 Taps
2 Kegs
1/2 Barrel
115 Volts
5-15P
Rating
 
Price
$5,080.25 $4,433.04
69
29
Stainless Steel
52.5
3 Taps
3 Kegs
1/2 Barrel
115 Volts
cULus
Rating
 
Price
$4,916.00
95.50
29.00
Black
36.88
4 Taps
5 Kegs
1/2 Barrel
115 Volts
5-15P
Rating
  • 4 1
(1)
Price
$5,062.51 $4,417.56
72
24.38
Black
51.25
4 Taps
3 Kegs
1/2 Barrel
115 Volts
cULus
Rating
 
Price
$4,839.00
80.00
29.00
Black
36.88
4 Taps
4 Kegs
1/2 Barrel
115 Volts
5-15P

Items Related to Beverage Air DD50HC-1-C-S

BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Beverage Air DD50HC-1-C-S 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 2 Kegs Capacity, 115 Volts
DD50HC-1-C-S 1 Tap 1/2 Barrel Draft Beer Cooler - Stainless Steel, 2 Kegs Capacity, 115 Volts
$5,094.05