Beverage Air DD50HC-1-B 2 Taps 1/2 Barrel Draft Beer Cooler - Black, 2 Kegs Capacity, 115 Volts
Calculate
- 2023 model, meets the newest EPA and DOE codes.
Beverage Air DD50HC-1-B Specifications
| Number of Kegs | 2 Kegs |
|---|---|
| Number of Taps | 2 Taps |
| Amps | 7.4 Amps |
| Installation Type | Built-In |
| Construction | Stainless and Galvanized Steel |
| Brand | Beverage Air |
| Refrigerant Type | R-290 |
| Made in | USA |
| Type | Beer Dispensers |
| Certifications | cULus |
| Number of Doors | 2 |
| Exterior Finish | Black |
| Door Type | Solid |
| Sections | 2 |
| Style | 1/2 Barrel |
| Voltage | 115 Volts |
| Width (in) | 50.5 |
| Height (in) | 52.5 |
| Depth (in) | 29 |
| Weight | 310.00 |
Additional Information on Beverage Air DD50HC-1-B
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Beverage Air DD50HC-1-B Certifications
cULus
UL (Underwriters Laboratories) approval for the US and Canada
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
UL EPH
Certifies that the goods conform to public health and environmental quality compatibility requirements.
UL EPH Classified
This product complies with UL EPH standards and meets ANSI/NSF requirements.
UL-Sanitation
This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).
Beverage Air DD50HC-1-B Description
The DD50HC-1-B Draft Beer Cooler from Beverage Air is an excellent choice if your establishment needs a reliable draft beer serving platform that will last for many years. This unit has 17.86 cu. ft. of cold storage to hold two ½ kegs.
The kegs inside are kept safe with self-closing doors with locks for security. Magnetic door gaskets are included to provide a secure seal. The interior walls and ceiling are made from galvanized steel while the floor and door sill feature reinforced stainless steel construction. This unit has a stainless steel top with a built-in drip tray to catch spills. The drip tray connects to a drain tube at the bottom of the unit to empty into a floor drain. Beer served from this unit is always nice and cool without too much foam thanks to the insulated 3" stainless steel dispensing tower.
On the side of this beer dispenser is a self-contained refrigeration system featuring a ¼ HP compressor that puts out 1702 BTU/hr of cooling. The compressor can be located on either the left or right side of the unit to best fit your needs. The interior is kept at a temperature between 36ºF and 38ºF by the fully electronic controls. An epoxy-coated evaporator coil will make sure reliable refrigeration with minimal maintenance can be provided for years to come. To meet all environmental regulations this unit uses R290 hydrocarbon refrigerant that minimizes negative effects on the atmosphere. An automatic non-electric defrost system provides convenience and minimizes downtime.
To connect this unit to a standard 115v/60/1-ph power outlet an 8’ power cable comes pre-wired from the factory with a NEMA 5-15P plug set.
Standard Features:
- Cabinet Construction
- Full electronic control
- Field reversible doors
- Self-closing doors with locks
- Magnetic gaskets provide positive door seal
- 3” Insulated dispensing tower(s) with dual draft arm
- Top is made from heavy-duty stainless steel including drip tray
- Compressor available on left or right, specify at time of unit order
- Exterior is wear resistant vinyl on steel in black or stainless steel finish
- Drain tube located at bottom front of cooler or connection to floor drain
- Interior is galvanized steel on walls and ceiling, reinforced floor and doorsill are heavy duty stainless steel
- Refrigeration System
- Epoxy coated evaporator coil
- Automatic, non-electric evaporator
- Models feature forced air refrigeration to keep beer in kegs ice cold for dispensing
- Refrigeration system uses R290 refrigerant to comply with all environmental concerns
- Options & Accessories
- Wine taps
- Turbo taps
- Glass rinser
- Faucet locks
- Wine models
- 1-5 Tap tower
- Low profile casters
- 2,3 & 4 way manifolds
- Foot pedal door opener
- Club top models available
- No draft/hole cover option
- Stainless steel interior available
- 3”-6” casters or 6” legs with adjustable plate
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Beverage Air DD50HC-1-B Accessories
Beverage Air DD50HC-1-B Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Beverage Air DD50HC-1-B to Other Products
Items Related to Beverage Air DD50HC-1-B
