Nor-Lake KLB88-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Indoor +35°F Cooler, 8' x 8' x 6'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, CPB075PC-S-0, R290 Capsule Pak Refrigeration, 115v/60/1-ph

If your operation needs a large amount of refrigerated space, the KLB88-C 8' x 8' x 6'-7" H Kold Locker from NorLake is up to the task. This indoor walk-in coolers with top mounted compressor is built to last and will serve your needs for many years. The interior of this walk-in has 388 cu. ft. of refrigerated space.

To achieve an R-value of 25 the 4" thick wall panels of this walk-in are constructed from foamed-in-place polyurethane insulation encased in 26 gauge steel. Both the interior and exterior sides of each panel feature an embossed stucco coating for resistance to corrosion. Assembling a Kold Locker walk-in is simple with each panel featuring female and male rails that mate together. Once mated together the panels are fully tightened with foamed-in-place cam locks which assure an airtight connection. The corners are kept sealed with panel gaskets that go around the outer perimeter without any breaks or cuts. The edge caps on the ceiling and floor panels are not overlapped or mechanically fastened, instead, they are foamed-in-place so they don’t come loose.

The standard door on this unit is 26” wide and comes with a stepped profile that provides a barrier against airflow. Two cam-lift hinges are included with the door and can be installed on the right or left. These hinges are field-adjustable to make sure the door swings freely while providing an airtight seal. A spring-assisted door closer is included to keep the door from being left ajar. The door comes pre-hung in a 4’ wide panel with a replaceable perimeter heating wire, magnetic stainless steel trim, a digital thermometer, a vapor proof LED lighting fixture and a switch with exterior indicator light. The door can be secured with an NL 9800 deadbolt locking handle with an independent key/padlock feature. To prevent workers from being locked inside, a safety release is included.

The ceiling-mounted refrigeration unit is an RCPB050JC-S-0-EV Capsule Pak unit that produces 4060 BTU/hr of efficient cooling that maintains temperatures between 35°F and 38°F. To set the temperature inside the walk-in the Enviro-Control™ system is included, this will efficiently maintain the temperature and also lets you set the defrost timer. An automatic condensate vaporizer is included removing the need for drain lines.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)