Nor-Lake KLB7788-C Walk-In Cooler & Top Mounted Compressor
- A refrigeration Technician is not required.
- 2023 model, meets the newest EPA and DOE codes.
- Our Exclusive FREE extras:
- Stainless Steel 30'' x 36'' door kick-plate
- Standard features
- Full 4” thick panels foamed-in-place with HFC-245fa polyurethane insulation which is CFC and HCFC free
- Free electronic controls and digital thermometer
- Note! Refrigeration systems weigh 175lbs to 350lbs. and may require a hoist. The electrical hook-up may require a licensed electrician.
Nor-Lake KLB7788-C Specifications
Nominal Depth | 8 Feet |
---|---|
Nominal Width | 8 Feet |
Brand | Nor-Lake |
Refrigerant Type | R-290 |
Refrigeration Mounted | Top |
Made in | USA |
Shipping | Quick Ship Model |
Category | Walk In Cooler, Modular, Self-Contained |
Compressor Location | Top Mounted |
With Floor | Floor Included |
Usage | Indoor |
Voltage | 115 Volts |
Width (in) | 96 |
Height (in) | 91 |
Depth (in) | 96 |
Weight | 1511.00 |
Additional Information on Nor-Lake KLB7788-C
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Nor-Lake KLB7788-C Description
For operations that require a large amount of refrigerated space, a walk-in unit like the KLB7788-C 8' x 8' x 7'-7" H Kold Locker from NorLake is a great option. This walk-in coolers with top mounted compressor has a height of 7’7” providing additional vertical space and in total the interior offers 372 cu. ft. of refrigerated space.
This cooler is made up of 4” thick panels featuring foamed-in-place polyurethane insulation to keep the heat where it belongs, outside. Both sides of the panel have 26 gauge corrosion-resistant stucco embossed coated steel. Assembly is easy since each panel has female and male rails that overlap for a mechanically air-tight design. Foamed-in-place cam locking fasteners ensure that panels lock together tightly for a secure seal. The corners are protected by a continuous panel gasket that goes around the outer perimeter without any cuts or breaks. The ceiling panels feature foamed-in-place edge caps that will stay in place for the life of the cooler.
The door that ships standard with this walk-in unit is 26” wide and comes with a stepped profile providing a barrier against airflow. This door comes with two hinges both of which are cam-lift and adjustable. This allows the door to be easily adjusted over the lifetime of the walk-in as it settles. The door also comes with a spring-assisted door closer to make sure it’s never left ajar. The 4-foot wide door panel comes with the door pre-hung and includes a vapor-proof LED lighting fixture activated by a switch connected to an external indicator light, replaceable heating wire, stainless steel trim, and a digital thermometer. To keep items inside secure, an NL 9800 deadbolt handle is included with an independent key/padlock feature. To prevent lock-ins there is a safety release inside.
The interior temperature is efficiently maintained between 35°F and 38°F by the RCPB075JC-S-4-EV Capsule Pak Refrigeration System in the ceiling that produces 6250 BTU/hr of heat rejection. The Capsule Pak unit comes with the Enviro-Control™ electronic control system to adjust the temperature and set the timing for automatic defrosting. To remove the need for drain lines an automatic condensate vaporizer is shipped loose and needs to be wired in the field.
Standard Features:
- STANDARD MODELS SHIP THE SAME DAY
- DOE compliant
- USDA accepted
- Magnetic gasket
- 15 year panel warranty
- Cooler or freezer models
- Indoor or outdoor models
- 26" wide, self-closing door
- CN UL flame spread listed
- Perimeter door heater wire
- Floor double sweep gasket
- Spring actuated door closer
- Sizes from 4' x 6' to 10' x 14'
- Two temperatures: +35°F, -10°F
- 18 months parts & labor warranty
- Digital thermometer and light switch
- Heavy duty adjustable cam-lift hinges
- Three heights: 6'7" & 7'7" with floor; 7'4" floorless
- Air-cooled condensing unit (wall mount - 10 day ship)
- Smooth aluminum interior floor (on models with floor)
- Floorless models supplied with NSF listed vinyl sealers
- Oregon State listed, City of Houston listed & California State listed
- Automatic condensate vaporizer. No drain line required on indoor units
- Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
- Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
- Deadbolt locking handle with independent key/padlock feature and inside safety release
- Time clock or electronic control provided for automatic defrost on both coolers and freezers
- 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
- NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
- UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
- High output low profile LED light positioned above the door to prevent interference with shelving or product
- Hot gas condensate vaporizer available on many models
- Refrigeration hood
- -20°F ambient controls
- White membrane roof and trim
- Exterior ramp
- Electric vaporizer
- Floor tread plate kit
- U-shaped shelving system
- Door hood (outdoor models)
- Five year compressor warranty
- Condensing unit air deflector kit
- Heights: 8'7" with floor, 8'4" without floor
- Leak detector/alarm (may be a requirement in some areas)
- Heater kit for outdoor use where ambient conditions may go below 32°F
- Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)
NOTE! This is a general product line video and does not necessarily reflect the listed model.