Hatco HDW-1N Warming Drawer Unit

If you are looking for a freestanding single-drawer warmer that won’t take a lot of space in your kitchen, the 20.88" wide HDW-1N by Hatco is the unit you’re looking for.

Mounted on durable 4" legs, this drawer warmer is narrower than conventional warming drawers so it can easily fit into limited spaces. It holds food in a large 6" deep pan, which comes in the package. With high-quality stainless steel interior and exterior, this unit is ready for heavy commercial use, 

The drawer slides are also made of stainless steel and allow full extension for safe, no-tilt placement and removal of the food pan. The durable nylon rollers are built to last, so you won’t have to worry about additional costs for service, repairs, or replacement parts.

The top and sides of the cabinet are fully insulated for a structurally sound unit and an energy-efficient performance. Thermostatic controls allow you to instantly set the right temperature for your food. 

Consider a colored front panel for your warming drawer as a way to color-code products to easily identify contents when you have multiple warmers running in the kitchen. 

The Hatco HDW-1N warming drawer is an NSF and cULus-certified product made in the USA. It ships with a 6' cord and plug.

• Available in narrow and standard widths
• Adjustable sliding vents on each drawer
• Heavy-duty drawer slides with nylon rollers
• Unit comes with a 6' (1829 mm) cord and plug
• Two-year parts warranty on heating elements and drawer rollers and slides
• Completely insulated individual cavities provide maximum energy efficiency
• Each drawer has a recessed individual thermostatic control, temperature monitor, and On/Off switch
• The pan supplied with each drawer lifts straight out of standard width Drawer Warmers, 20.75" x 12.75" x 6" (527 x 324 x 152 mm)

• Designer Drawer Front Colors (Non-standards colors are non-returnable 
  • Black 
  • Navy Blue 
  • Warm Red 
  • Gray Granite 
  • White Granite 
  • Hunter Green 
  • Antique Copper
• Chip Guard (HDW-1, 2, 3 & 4 models only)
• ITC Digital Temperature Control (required on all drawers)
• Oversized Drawer Frame and Pan 20” x 15” x 5” (508 x 381 x 127 mm) (Standard width models only)
• Biscuit Pan Drawer (Accommodates two 18” x 13” (457 x 330 mm) Half-size Sheet Pans (Standard width models only)

• Stainless Steel Food Pans
• 6" (152 mm) Stainless Steel Adjustable Legs
• Water/Spillage Pan – one per drawer (excludes BIS Drawer and OS-Pan Options)
• 3" (76 mm) Diameter Locking Casters - adds 4.25" (108 mm) to height (1-, 2-, or 3-drawer models)
• 5" (127 mm) Diameter Locking Casters – adds 6.25" (159 mm) to height (1-, 2-, 3-, or 4-drawer models)
• 2" (51 mm) Diameter casters - all swivel, 2 lock - adds 2.5" (64 mm) to height (1-, 2-, or 3-drawer models)
• Custom trivet raises food product .5" (13 mm) off bottom of full size pan 17.5" x 9.5" x .5" (445 x 242 x 13 mm)
• Splash Baffle - one per drawer, Water/Spillage Pan creates humidified environment (excludes BIS Drawer and OS-Pan Options)