Groen BPP-30GA BPP Series 30 Gallon Gas Floor Model Tilting Skillet Braising Pan with Manual Contols - 104,000 BTU

Braising Pan, gas, 30-gallon capacity, 10" deep pan, 38" pan height, IPX6 water rated electronic Advanced controls with digital display, 1 minute to 10 hour timer, 175°F - 400°F preset temperatures along with manual setting capability, power tilt, standard etch marks, faucet bracket, round tubular open leg base, stainless steel construction, bullet feet, electric spark ignition, 104,000 BTU/hr, cCSAus, NSF, Made in USA

The Groen BPP-30GA Braising Pan is an easy pick for medium to large establishments that require a large batch cooking solution.  The 30-gallon capacity of the 10” deep pan can be used for more than just braising, it can also be used to boil, sear, saute, fry, and steam large amounts of product to meet your demands.  This Gas Tilting Skillet Braising Pan has a firing rate of 104,000 BTU/hr.

The cooking surface consists of a stainless steel clad plate that is ⅜” thick which resists deforming or warping. It has been polished to a 100 emery grit finish that keeps the contents of the pan from sticking and in turn simplifies cleaning.  The 3” radius corners make it simple to stir and move the contents of the pan. It’s easy to see the fill level of the pan with the etched graduations that are labeled in both gallons and liters.

The body of the Groen BPP-30GA Braising Pan is made from high quality 304 stainless steel and is welded from a single solid piece. The pan body has a #3 finish that looks great and is easy to clean.  The pan body sits on an open leg stand with height-adjustable bullet feet to keep the unit level on uneven flooring. A faucet bracket is included for mounting a faucet on the left side, right side or rear right of the unit.  

This braising pan has an easy to use power tilt function for the precise pouring of the pan’s contents via a 3-position control switch. If electrical power to the powerful motor is interrupted it is possible to manually override the power tilt function so your current batch of product isn’t wasted.

The Groen BPP-30GA Braising Pan uses the advanced control panel which is located in an IPX6 rated stainless steel housing on the right side of the machine.  The controls include: a power on-off switch including an indicator light, a temperature control knob, the above-mentioned 3-position tilt switch, an LED display of the temperature or cook time, a heating indicator light, buttons to reset the low and high temperature presets, a manual mode button to select the pan temperature, and a  timer set button with indicator light.

This tilting braising pan is thermostatically-controlled and will automatically shut-off when the preset temperature is achieved and will automatically power on when the temperature falls below the preset temperature.  All Groen tilting braising pans come standard with a high limit thermostat for safety.

This model uses 5.0 amps at 115v/60/1-ph and requires a ½” NPT gas connection. Make sure to select either the LP gas or Natural gas option depending on what your establishment uses.

The Groen BPP-30GA Braising Pan is made in the USA and is CSA, NSF and cCSAus certified.