Groen BPM-40GC BPM Series 40 Gallon Gas Floor Model Tilting Skillet Braising Pan with Manual Contols - 144,000 BTU

Braising Pan, gas, 40-gallon capacity, 10" deep pan, 38" pan height, IPX6 water rated electronic Classic controls, manual tilt, standard etch marks, faucet bracket, round tubular open leg base, stainless steel construction, bullet feet, electric spark ignition, 144,000 BTU/hr, cCSAus, NSF, IPX6, Made in USA

The Groen BPM-40GC Braising Pan is ideal for large-scale commercial use like buffets and casual dining restaurants that require large batch cooking. The expansive 10” deep pan has a capacity of 40 gallons and is very versatile, This Gas Tilting Skillet Braising Pan can be used as a griddle to sear meat, as a large fry pan for cooking stir fry or as a large stock pot for soup; the possibilities are endless.

The manual tilt function of this braising pan is operated by a hand crank with a worm-and-gear mechanism. It provides quick and precise control when pouring. The full vertical position is reached in 24 turns, and you can go past full vertical to aid in cleaning.

The ⅝” thick cooking surface prevents any warping. It’s clad in stainless steel which is polished to a 100 emery grit finish.  The cooking surface is heated efficiently and evenly through heat transfer fins. 3” radius corners simplify cleaning and stirring the contents of the pan.  Fluid levels can be measured with the graduated fill-level marks and are in both gallons and liters.

You can set the temperature in the Groen BPM-40GC Braising Pan from between 175 to 425°F and has a firing rate of 144,000 BTU/hr. When the selected temperature has been achieved the unit automatically turns off and switches back on when the temperature dips below the target.

The electronic controls are housed in an IPX6-rated stainless steel housing, making it water resistant to spills and splashes.

For ease of mind and the safety of your crew and establishment, this braising pan has a high limit thermostat.

The body of the braising pan is made from a single piece of welded 304 stainless steel which has a #3 finish. This makes the unit simple to clean day in and day out while maintaining its appearance. This braising pan comes with adjustable bullet feet keeping it level on uneven flooring. A bracket is included for installing a faucet on the left, right or right rear of the body.

The unit uses 5.0 amps of power at 115v/60/1-ph and requires a ½” NPT gas connection. Make sure to select either LP gas or Natural gas depending on what your establishment uses.

The BPP-40GC Braising Pan is certified by the CSA, cCSAus and NSF and is made in the USA.