Delfield N8768N Narrow Drop-In Hot Food Well Unit
MPN#: N8768N
Free Freight?
Quick Ship
$3,599.00 /
Contact us for details
Calculate
Product Protection
Starting at
Delfield N8768N Specifications
| Construction | Stainless and Galvanized Steel |
|---|---|
| Brand | Delfield |
| Certifications | NSF |
| Width (in) | 67.48 |
| Height (in) | 9.5 |
| Depth (in) | 15.87 |
| Weight | 130 |
Additional Information on Delfield N8768N
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Delfield N8768N Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
UL
UL has tested representative samples of this product and determined that the product meets specific, defined requirements.
Delfield N8768N Description
Narrow Drop-In Hot Food Well Unit, Electric, individual pan design, wet or dry type, 3-pan size for 12" x 20" pans, infinite controls, stainless steel top & inner liner, galvanized outer liner, (66-1/2" x 15" cutout required), cUL, UL, NSF
Narrow Drop-In Hot Food Well Unit, electric, 3-pan size for 12" x 20" pans, individual pan design, wet or dry type, infinite controls, stainless steel top & inner liner, galvanized outer liner, (66-1/2" x 15" cutout required), cUL, UL, NSF
Standard Features:
- Wet and dry operation
- Galvanized exterior body
- Must be hard wired in the field
- Standard 1/2” stainless steel drain(s)
- 11.87” x 19.87” individual hot food wells
- Top is constructed of 18-gauge stainless steel
- One year parts and 90 day labor standard warranty
- Non-marring press fit top gasket is supplied standard
- Wells to be depressed slightly into the top to hold in condensation
- Flush mounted die stamped drawn 12” x 20” individual 20-gauge wells
- Models with drains are manifolded together standard to one main gate valve
- Unit shall be insulated on all sides with 1” of fiberglass and bottom to have 2” of fiberfrax blanket insulation
- Individual infinite temperature controls standard wired to one main control panel with 4’ of conduit and wire. Field install control panel at location
Options & Accessories:
- Telescoping covers
- Adapter plates and bars
- 220 volt, 50 cycle electrical system
- Single- or double-service flip-up sneeze guards
- Inclusion of this option will alter electrical specifications of the unit
Specifications:
Top shall be one-piece 18-gauge stainless steel, with 0.63” overhang around perimeter and die stamped 19.87” x 11.87” (50.5cm x 30cm) openings with depressed edges. Formed well below each opening shall be 6.25” (16cm) deep. Each well shall have an individual infinite control and 1000 watt heating element attached to bottom of well. Exterior housing shall be 20-gauge galvanized steel. Unit shall be insulated on sides and between wells with 1.00” (2.5cm) fiberglass; bottom shall have 1.00” (2.5cm) blanket insulation. Unit shall have all individual controls wired to a control panel for mounting in counter or at a remote location; 4’ (1.2 m) length of wiring and conduit are provided. Unit shall have a three-wire electrical junction box to allow hard-wiring at installation. Models with drains are manifolded together standard to one main gate valve.
Delfield N8768N Accessories
Delfield N8768N Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Delfield N8768N
Drop-In Hot Food Wells 1025 products
