Delfield N8717-D Drop-In Hot Food Well Unit
MPN#: N8717-D
Free Freight?
Quick Ship
$1,747.50
Contact us for details
Calculate
Product Protection
Starting at
Delfield N8717-D Specifications
| Construction | Stainless and Galvanized Steel |
|---|---|
| Brand | Delfield |
| Width (in) | 17.88 |
| Height (in) | 9.5 |
| Depth (in) | 26 |
| Weight | 41 |
Additional Information on Delfield N8717-D
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Delfield N8717-D Description
Drop-In Hot Food Well Unit, Electric, individual pans, wet/dry type with drain & manifold, 1-pan size for 12" x 20" pan, individual infinite temperature controls, stainless steel top & wells, galvanized outer liner (16-7/8" x 25" cutout required)
Drop-In Hot Food Well Unit, electric, individual pans, wet/dry type with drain & manifold, 1-pan size for 12" x 20" pan, individual infinite temperature controls, stainless steel top & wells, galvanized outer liner (16-7/8" x 25" cutout required)
Standard Features:
- Wet and dry operation
- Galvanized exterior body
- Available for quick shipment
- Must be hard wired in the field
- Non-marring press fit top gasket
- Standard 1/2” stainless steel drain(s)
- Top is constructed of 18-gauge stainless steel
- One year parts and 90 day labor standard warranty
- Wells depressed slightly into the top to hold in condensation
- Flush mounted die stamped drawn 12” x 20” individual 20-gauge wells
- 11.87” x 19.87” single hot food wells are manifolded together standard to one main gate valve
- Unit shall be insulated on all sides with 1” of fiberglass and bottom to have 2” of fiberfrax blanket insulation
- Individual infinite temperature controls standard wired to one main control panel with 4’ of conduit and wire. Field install control panel at location
Options & Accessories:
- Telescoping covers
- Adapter plates and bars
- Omit drains and manifold
- 220 volt, 50 cycle electrical system
- Single- or double-service flip-up sneeze guards
- Inclusion of this option will alter electrical specifications of the unit
Specifications:
Top shall be one-piece 18-gauge stainless steel, with 0.65" (1.7cm) overhang around perimeter and die-stamped 19.87" x 11.87" (50.5cm x 30.2cm) openings with depressed edges. Formed well below each opening shall be 6.25" (15.9cm) deep. Each well shall have an individual temperature control and 1000 watt heating element attached to bottom of well. Each well shall be equipped with a .5" female N.P.T. drain located in right rear corner. All drains manifold to a .5" gate valve at the left. Exterior housing shall be 20-gauge galvanized steel. Unit shall be insulated on sides and between wells with 1.00" (2.5cm) fiberglass; bottom shall have 2.00" (5.1cm) blanket insulation. Unit shall have all individual controls wired to a control panel for mounting in counter or at a remote location; 4' (1.2 m) length of wiring and conduit are provided. Unit shall have a three-wire electrical junction box to allow hard-wiring at installation.
Delfield N8717-D Accessories
Delfield N8717-D Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Delfield N8717-D
Drop-In Hot Food Wells 1028 products
