1 (800) 555-0666

Delfield F2999CP 99.25" 6 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts

SKU#: F2999CP
Free Freight?
Quick Ship
$15,509.00

Contact us for details

$13,260.20
or enjoy small payments $284.96/mo.
Lease Payment Calculate
Product Protection
Product Protection
Starting at
Reward Points
Reward Points
You will earn 15509
  • 2023 model, meets the newest EPA and DOE codes.

Delfield F2999CP Specifications

Width Range95 to 120 Inches
Top StyleMarine Edge
ConstructionStainless Steel
BrandDelfield
Refrigerant TypeR-290
CertificationsNSF
Capacity12 Full Size Food Pans
Compressor LocationRemote
Number of Drawers6
Sections3
Voltage115 Volts
Width (in)99.25
Height (in)24
Depth (in)31.94
Weight725.00

Additional Information on Delfield F2999CP

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Delfield F2999CP Certifications

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL

UL

UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

Delfield F2999CP Description

Refrigerated Low-Profile Equipment Stand, 99-1/4"W x 31-47/50"D x 24"H, three-section, (6) drawers (pans not included), stainless steel top & drawer fronts, front non-spill edge, ABS interior sides, 4" casters, side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF

With six (6) 27" wide drawers and an 18-gauge stainless steel top, this Delfield F2999CP refrigerated low-profile equipment stand is made for large kitchens looking to centralize cooking or prep and cold food storage. 

Generous storage space 

This commercial chef base spans a width of 99 ¼ inches with a depth of 31 47/50", allowing you to transform part of your kitchen into a full-fledged food prep and storage station. It stands at 24", creating a low-profile design perfect for setting up a wide range of both small and large prep or cooking equipment. 

You can keep two (2) 4" deep hotel pans of fresh ingredients in each drawer so everything stays fresh but also within reach whenever you need it. To help maintain a safe and clean work area, a marine edge outlines the full perimeter of the top to top grease and other spills from falling onto the kitchen floor. This unit is supported by 4" casters that offer much-needed mobility. A wall bracket is included in the package for installing the unit against a solid surface.

Solid build and smooth drawer movement

This low-profile refrigerated equipment stand features rugged stainless steel and galvanized steel construction that guarantees high resistance to wear-and-tear for a long-lasting unit! The cabinet is insulated using high-density polyurethane foamed in place between the exterior and interior.

The entire drawer system and the drawer fronts are also made entirely of stainless steel so you know your inventory is well-protected. The track rollers on the drawers can be operated with no grease needed and are extra sturdy thanks to the Delrin construction. The tracks have an anti-friction binary roller system and a stay-shut feature to ensure trouble-free opening and closing! 

Environmentally friendly refrigeration system

The R290 refrigerant cools the refrigerated base at 36° to 40°F with no harmful effect on the ozone. The commercial chef base offers electric temperature control so you can manage the operation with all the precision and convenience you need.  Mullion-designed coated blower coils ensure proper air circulation so your products do not lose freshness while the electric condensate evaporator protects from damage on both the products and equipment.

The snap-in door gaskets prevent hot air from entering the cabinet while an ABS interior liner guards these gaskets against damage from impact during access and handling. All refrigeration parts are packed on the side of the equipment stand as a single piece to cut down maintenance and servicing times.

Powered by a 1/4 hp compressor, this Delfield F2999CP low-profile refrigerated equipment stand combo has NSF, cUL, and UL certifications. It is rated at 4.8 amps and uses 115/60/1 electrical connection with the 8' cord and NEMA 5-15P plug supplied.

Need more commercial refrigerators & freezers? We've got a great collection right here at CKitchen!

Refrigerated Low-Profile Equipment Stand, 99-1/4" W, Casters, Three-section, ABS Interior sides, Front non-spill edge, (6) Drawers (pans not included), Stainless steel top & drawer fronts, Side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF


Standard Features:
  • Digital thermometer
  • Mounted on casters
  • 8' cord and plug supplied
  • Standard stainless steel ends
  • Wall-mounted bracket to prevent tipping
  • Exterior drawer fronts are stainless steel
  • Snap-in drawer gaskets for easy removal
  • Environmentally friendly R290 refrigerant
  • Height of surface for setting equipment is 25.50"
  • Top is heavy duty stainless steel, with full perimeter marine edge
  • Interior refrigerated base cabinet section to maintain 36° to 40° meeting NSF7
  • Three year parts and labor warranty and an additional two year compressor parts warranty.
  • When ordering, specify make, model and depth of cooking equipment sitting on the equipment stand
  • Base interior cabinet is cooled with mullion style coated blower coil(s) mounted between each door/drawer section for even air and
  • temperature control 
  • High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam insulation throughout unit
  • Full Extension Plus Drawer system is a complete drawer system. Drawer system is sized to hold 12" x 20" x 4" deep hotel pans (by
  • others). The drawer system is all stainless steel construction for maximum durability 
Options & Accessories
  • Drawer locks
  • Stainless steel back
  • Plastic laminate end
  • Plastic laminate front
  • Plastic laminate back
  • 6" casters in lieu of 4"
  • Mechanical housing left side
  • Doors in lieu of drawers (except 32")
  • Celsius readout for electronic control
  • 6.12" adjustable full stainless steel legs and bullet feet
  • Single drawer in lieu of two high drawers  (8" deep pans)
  • Remote refrigeration available in R404A (contact factory)
  • 8" deep clear polycarbonate pans in full, 1/2 and 1/3 size dimensions available
Specifications
Exterior top is 18-gauge stainless steel with full perimeter marine edge. Corners are fully welded with smooth radii corners for easy clean out. Interior sub-top made of 22-gauge 2BF stainless steel is made integral with the top by injecting 2.00” of high density polyurethane foam between the exterior and interior tops. Refrigerated base interior back and bottom are constructed of a 22-gauge 2BF stainless steel. Exterior bottom and back are made of 22-gauge galvanized steel. Exterior sides aer made of stainless steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00” of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095” thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermo-break and superior structural material for fastening doors and drawers. Finished stainless steel ends are standard. Louver, coil panel and drawer faces are all standard with stainless steel construction. Units are supplied with wallmounted bracket and threaded rod to allow installation of the unit against a solid surface. Full Extension Plus drawer system is a complete drawer system, which can operate independent of the unit it’s installed in. Drawer system is sized to hold 12” x 20” x 4” deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Drawer track rollers are made of Delrin and do not require grease for operation. Intermediate tracks are removable without tools and house Delfield’s “anti-friction binary roller system”. Drawer boxes are designed with “easy pan grip flanges”. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87” of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system. Drawers are backed by a 10-year warranty on the track assembly. Unit is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are welded to the bottom side of the unit and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 4” casters are mounted standard. Refrigeration system uses R290 refrigerant, and maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature at 100˚F (38˚C) ambient room temperature. Interior cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for even air and temperature control. An electronic temperature control and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. The digital Thermometer with stainless steel guard is located in the Top nosing above the machine compartment (standard on right). 

Options for Delfield F2999CP

Lift gate option
Door & drawer options
Drawer warranty
Compressor location
Top options
Finish
Mounting options
What is included
  • Parts & Labor warranty: 3 year parts & labor warranty, standard
  • Voltages: 115v/60/1-ph, 4.8 amps, NEMA 5-15P, standard

Delfield F2999CP Parts

All Delfield F2999CP Parts

Delfield F2999CP Reviews

There are no reviews yet for this product.

Questions and Answers

Compare Delfield F2999CP to Other Products

Rating
Price
Width (in)
Depth (in)
Height (in)
Sections
Number of Drawers
Construction
Compressor Location
Refrigerant Type
Top Style
Voltage
Certifications
Rating
 
Price
$15,509.00 $13,260.20
99.25
31.94
24
3
6
Stainless Steel
Remote
R-290
Marine Edge
115 Volts
NSF
Rating
 
Price
$13,254.94 $13,254.94
48
29.00
25.00
1
2
Stainless & Galvanized Steel
Side Mounted
R-404
 
115 Volts
NSF
Rating
 
Price
$16,181.00 $13,239.00
66
32.75
26.19
2
4
Stainless Steel
Remote
HFC-404A
Marine Edge
115 Volts
 
Rating
 
Price
$17,091.00 $13,225.41
48
34.13
26
1
2
Galvanized & Stainless Steel
Side Mounted
R-404A
Flat
115 Volts
cULus
Rating
 
Price
$16,160.00 $13,221.00
63
34
27
2
4
Stainless Steel
Side Mounted
HFC-404A
Marine Edge
115 Volts
 
Rating
 
Price
$16,107.00 $13,178.00
80
34
27
3
6
Stainless Steel
Remote
HFC-404A
Marine Edge
115 Volts
 

Items Related to Delfield F2999CP

BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Delfield F2999CP 99.25" 6 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts
F2999CP 99.25" 6 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts
$15,509.00