1 (800) 555-0666

Delfield F2987CP 87.25" 6 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts

MPN#: F2987CP
Free Freight?
Quick Ship
$15,282.00 /

Contact us for details

$13,066.11 /
or enjoy small payments $280.79/mo.
Lease Payment Calculate
Product Protection
Product Protection
Starting at
Reward Points
Reward Points
You will earn 15282
  • 2023 model, meets the newest EPA and DOE codes.

Delfield F2987CP Specifications

Width Range77 to 94 Inches
Top StyleMarine Edge
ConstructionStainless Steel
BrandDelfield
Refrigerant TypeR-290
CertificationsNSF
Capacity10 Full Size Food Pans
Compressor LocationRemote
Number of Drawers6
Sections3
Voltage115 Volts
Width (in)87.25
Height (in)24
Depth (in)31.94
Weight672.00

Additional Information on Delfield F2987CP

A PDF viewer is required to view this product's information.
Download Adobe Acrobat software

Delfield F2987CP Certifications

NSF

NSF

This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.

UL

UL

UL has tested representative samples of this product and determined that the product meets specific, defined requirements.

Delfield F2987CP Description

Refrigerated Low-Profile Equipment Stand, 87-1/4"W x 31-47/50"D x 24"H, three-section, (6) drawers (pans not included), marine edge stainless steel top & drawer fronts, front non-spill edge, ABS interior sides, 4" casters, side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF

The Delfield F2987CP is an 87 1/4" wide, 31 47/50" deep, and 24" tall low-profile equipment stand with a six-drawer refrigerated base and an 18-gauge stainless steel top with durable stainless steel ends and a non-spill marine edge. With stainless steel and galvanized steel inside and out, this commercial chef base will survive the rigors of everyday heavy-duty use!

Each drawer section can fit two (2) 12 x 20 x 4" hotel pans that can accommodate smaller fractional pans as well. The entire drawer system along with the drawer fronts is made of stainless steel. The Delrin track rollers are well-made and can be operated without grease. The tracks are designed to achieve minimal friction so that access is safe and smooth! 

The R290 refrigerant keeps the products inside at temperatures 36° to 40°F while leaving the ozone layer unharmed for a more eco-friendly operation. Mullion-style coated blower coils distribute the air for even temperature. You can set and monitor temperatures electronically, and an electric condensate evaporator. Additionally, the snap-in door gaskets and high-density polyurethane foamed in place for airtight insulation form a solid structure for added strength and excellent temperature retention. The electronic condensate evaporator keeps condensation at bay so products remain fresh and the refrigerator operates properly for many years.

All refrigeration parts including the are mounted together as one single piece on the side of this commercial chef base where they can be easily accessed for maintenance and service. This model has sturdy 4" casters and also comes with a wall bracket included in the package for installing the unit against a solid surface.

This Delfield low-profile refrigerated equipment stand is NSF, cUL, and UL-approved for safe commercial use. It is rated at 4.8 amps and uses a 115/60/1 electrical connection. 8' cord and NEMA 5-15P plug supplied.

Get more top-of-the-line commercial refrigerators & freezers only here at CKitchen!

Refrigerated Low-Profile Equipment Stand, 87-1/4" W, Casters, Three-section, ABS Interior sides, Front non-spill edge, (6) Drawers (pans not included), Marine edge stainless steel top & drawer fronts, Side-mounted refrigeration system with electric condensate evaporator, R290 Hydrocarbon refrigerant, 1/4 hp, cUL, UL, NSF


Standard Features:
  • Digital thermometer
  • Mounted on casters
  • 8' cord and plug supplied
  • Standard stainless steel ends
  • Wall-mounted bracket to prevent tipping
  • Exterior drawer fronts are stainless steel
  • Snap-in drawer gaskets for easy removal
  • Environmentally friendly R290 refrigerant
  • Height of surface for setting equipment is 25.50"
  • Top is heavy duty stainless steel, with full perimeter marine edge
  • Interior refrigerated base cabinet section to maintain 36° to 40° meeting NSF7
  • Three year parts and labor warranty and an additional two year compressor parts warranty.
  • When ordering, specify make, model and depth of cooking equipment sitting on the equipment stand
  • Base interior cabinet is cooled with mullion style coated blower coil(s) mounted between each door/drawer section for even air and
  • temperature control 
  • High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam insulation throughout unit
  • Full Extension Plus Drawer system is a complete drawer system. Drawer system is sized to hold 12" x 20" x 4" deep hotel pans (by
  • others). The drawer system is all stainless steel construction for maximum durability 
Options & Accessories
  • Drawer locks
  • Stainless steel back
  • Plastic laminate end
  • Plastic laminate front
  • Plastic laminate back
  • 6" casters in lieu of 4"
  • Mechanical housing left side
  • Doors in lieu of drawers (except 32")
  • Celsius readout for electronic control
  • 6.12" adjustable full stainless steel legs and bullet feet
  • Single drawer in lieu of two high drawers  (8" deep pans)
  • Remote refrigeration available in R404A (contact factory)
  • 8" deep clear polycarbonate pans in full, 1/2 and 1/3 size dimensions available
Specifications
Exterior top is 18-gauge stainless steel with full perimeter marine edge. Corners are fully welded with smooth radii corners for easy clean out. Interior sub-top made of 22-gauge 2BF stainless steel is made integral with the top by injecting 2.00” of high density polyurethane foam between the exterior and interior tops. Refrigerated base interior back and bottom are constructed of a 22-gauge 2BF stainless steel. Exterior bottom and back are made of 22-gauge galvanized steel. Exterior sides aer made of stainless steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00” of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095” thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermo-break and superior structural material for fastening doors and drawers. Finished stainless steel ends are standard. Louver, coil panel and drawer faces are all standard with stainless steel construction. Units are supplied with wallmounted bracket and threaded rod to allow installation of the unit against a solid surface. Full Extension Plus drawer system is a complete drawer system, which can operate independent of the unit it’s installed in. Drawer system is sized to hold 12” x 20” x 4” deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Drawer track rollers are made of Delrin and do not require grease for operation. Intermediate tracks are removable without tools and house Delfield’s “anti-friction binary roller system”. Drawer boxes are designed with “easy pan grip flanges”. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87” of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system. Drawers are backed by a 10-year warranty on the track assembly. Unit is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are welded to the bottom side of the unit and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 4” casters are mounted standard. Refrigeration system uses R290 refrigerant, and maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature at 100˚F (38˚C) ambient room temperature. Interior cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for even air and temperature control. An electronic temperature control and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. The digital Thermometer with stainless steel guard is located in the Top nosing above the machine compartment (standard on right). 

Options for Delfield F2987CP

Door & drawer options
Lift gate option
Drawer warranty
Compressor location
Top options
Finish
Mounting options
What is included
  • Parts & Labor warranty: 3 year parts & labor warranty, standard
  • Voltages: 115v/60/1-ph, 4.8 amps, NEMA 5-15P, standard

Delfield F2987CP Parts

All Delfield F2987CP Parts

Delfield F2987CP Reviews

There are no reviews yet for this product.

Questions and Answers

Compare Delfield F2987CP to Other Products

Rating
Price
Width (in)
Depth (in)
Height (in)
Sections
Number of Drawers
Construction
Compressor Location
Refrigerant Type
Top Style
Voltage
Certifications
Rating
 
Price
$15,282.00 $13,066.11
87.25
31.94
24
3
6
Stainless Steel
Remote
R-290
Marine Edge
115 Volts
NSF
Rating
 
Price
$13,079.12 $13,079.12
48
34.00
25.00
1
2
Stainless Steel
Remote
R-404
 
115 Volts
 
Rating
 
Price
$16,755.03 $13,108.35
112
34.13
24.38
3
6
Stainless & Galvanized Steel Exterior, Aluminum Interior
Side Mounted
R-290
Marine Edge
115 Volts
cULus
Rating
 
Price
$16,797.00 $12,997.89
60
34
26
1
2
Galvanized & Stainless Steel
Side Mounted
R-404A
Marine Edge
115 Volts
 
Rating
 
Price
$14,645.00 $13,147.55
48
32.5
26
1
2
Stainless Steel
Side Mounted
R-404A
Marine Edge
120 Volts
NSF
Rating
 
Price
$12,968.20 $12,968.20
60
29.00
25.00
2
4
Stainless and Galvanized Steel
Remote
R-404
 
115 Volts
NSF

Items Related to Delfield F2987CP

BBB Accredited Business
EKOMI Customer Award
FEDA
NAFED
Delfield F2987CP 87.25" 6 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts
F2987CP 87.25" 6 Drawer Refrigerated Chef Base with Marine Edge Top - 115 Volts
$15,282.00