Vulcan MSA24 24'' Countertop Gas Griddle with Thermostatic Controls - 54,000 BTU
Vulcan MSA24 Specifications
Plate Thickness | 1 Inch |
---|---|
Total BTU | 12000 - 55000 |
BTU | 54,000 BTU |
Installation Type | Countertop |
Power Type | Natural or Propane Gas |
Cooking Surface Material | Polished Steel |
Construction | Stainless and Aluminized Steel |
With Griddle | Yes |
Brand | Vulcan |
Griddle Plate Finish | Smooth Steel |
Made in | USA |
Number of Burners | 2 |
Certifications | NSF |
Burner Style | U-Shaped |
Control Type | Thermostatic |
Exterior Finish | Stainless Steel Front & Sides |
Category | Griddle, Counter Unit, Gas |
Controls | Thermostatic |
Heat | Gas |
Range Configuration | Griddle |
Usage | Heavy Duty |
Width (in) | 24 |
Height (in) | 15.25 |
Depth (in) | 31.5 |
Weight | 285.00 |
Additional Information on Vulcan MSA24
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan MSA24 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan MSA24 Description
The thermostatic controls on the MSA24 Heavy Duty Gas Griddle from Vulcan make it simple to griddle food accurately while making it easy to get repeatable results. This 24” wide countertop model is designed for heavy-duty use and can keep up with the demands of busy commercial kitchens. U-shaped burners apply even heat to the 1” thick polished steel griddle plate which provides plenty of thermal mass to keep the temperature of the cooking surface consistent without hot or cold spots.
With two temperature control knobs, this griddle provides accurate control over multiple zones and can be set from 200°F to 550°F to get the results you need. For even heat distribution the two 27,000 BTU/hr U-shaped burners are spaced 12” apart. Each pair of burners has one pilot safety valve to shut off gas to the pilot and burners if it’s extinguished. Ignition for this model is manual.
The chassis is made from fully welded aluminized steel and the exterior front, sides, and front top ledge are made from durable stainless steel for easy cleaning. Grease and crumbs that accumulate on the cooking surface are easily removed with a 3-½” wide trough and stored in a 6 qt. drawer made from stainless steel. To empty the grease drawer it is simple to remove from the front of the griddle.
To make keeping this griddle level on a counter simple it comes on adjustable 4” legs. The cooking height of this model is 11"
This griddle has a ¾” rear gas connection and requires 54,000 BTU/hr of gas input.
Standard Features:
- Manual ignition.
- Bottom heat shields.
- One year limited parts and labor warranty.
- Heavy duty chromed thermostat knob guards.
- ¾" rear gas connection and gas pressure regulator.
- 11" low profile cooking height on 4" adjustable legs.
- Fully welded stainless and aluminized steel chassis frame.
- Stainless steel front, sides and front top ledge with “Cool Bullnose” design.
- Large 6 quart stainless steel grease drawer (2 drawers on 60" and 72" models).
- One 27,000 BTU/hr. “U” shaped aluminized steel burner for every 12" of griddle width.
- One embedded snap action thermostat per burner with temperature adjust from 200°F to 550°F.
- 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes.
- Spatula wide 3 ½" grease gutter and chute is fully welded for easier cleaning and to stop grease migration.
- One pilot safety valve for every two burners. Safety will completely shut off gas to pilot and burners if pilot extinguishes.
- 30" deep plate (steel plate only).
- Hexavalent chrome plated cooking surface.
- Stainless steel stand with marine edges and casters.
- Full or partially grooved griddle plate. (steel or chrome plate only).
- Cutting board, condiment rail, plate rail and banking strip accessories.
- Rapid Recovery™ griddle plate (200-450°F controls, 48" maximum length).
Low profile heavy duty gas griddle. Stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel body frame. 11" low profile cooking height on 4" legs. 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes. Grease chute is fully welded to stop grease migration. One 27,000 BTU/hr. “U” shaped aluminized steel burner and mechanical snap action thermostat for each 12" of griddle width. Chrome thermostat knob guards. Temperature adjusts from 200° to 550° F. One pilot safety for every two burners. 3 ½" wide stainless steel grease trough. ¾" rear gas connection and gas pressure regulator. CSA design certified. NSF listed.
Vulcan MSA24 Accessories
Vulcan MSA24 Reviews
There are no reviews yet for this product.