Vulcan 972RX-30 72'' Countertop Gas Griddle with Thermostatic Controls - 162,000 BTU
Calculate
Vulcan 972RX-30 Specifications
| Plate Thickness | 1 Inch |
|---|---|
| Total BTU | 157000 - 240000 |
| BTU | 162,000 BTU |
| Installation Type | Countertop |
| Power Type | Natural Gas |
| Cooking Surface Material | Polished Steel |
| Construction | Stainless and Aluminized Steel |
| With Griddle | Yes |
| Brand | Vulcan |
| Griddle Plate Finish | Smooth Steel |
| Made in | USA |
| Certifications | NSF |
| Number of Burners | 6 |
| Burner Style | U-Shaped |
| Control Type | Thermostatic |
| Exterior Finish | Stainless Steel Front & Sides |
| Category | Griddle, Counter Unit, Gas |
| Controls | Thermostatic |
| Heat | Gas |
| Range Configuration | Griddle |
| Usage | Heavy Duty |
| Voltage | 120 Volts |
| Width (in) | 72 |
| Height (in) | 15.25 |
| Depth (in) | 37.5 |
| Weight | 790.00 |
Additional Information on Vulcan 972RX-30
parts-catalog.pdf 
owner-s-manual-french.pdf 
parts-list.pdf 
vulcan-972rx-30.specsheet.pdf 
sell-sheet.pdf 
owner-s-manual.pdf 
service-manual.pdf 
warranty-sheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 972RX-30 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 972RX-30 Description
The 972RX-30 Heavy Duty Gas Griddle from Vulcan is a highly dependable countertop griddle that runs on gas and comes in at 72” wide. Its thermostatic controls make sure food is cooked accurately making the results easily repeatable. The polished steel griddle plate is 1” thick providing plenty of thermal mass to maintain the cooking temperature and features an extended 30” depth for additional griddling space without extending the width of the unit.
To independently control the temperature between 200°F and 550°Fover separate sections of the griddle plate six embedded snap action thermostats are included. With half a dozen 27,000 BTU/hr U-shaped burners spaced 12” apart heat is applied to the griddle plate evenly. A pilot safety valve for every two burners keeps the kitchen safe and the burners feature manual and electronic ignition.
This griddle features a fully welded aluminized steel chassis for durability and stainless steel construction for the front, front top ledge, and sides making it easy to wipe down for cleaning. With a 6 qt, capacity grease drawer, this griddle has plenty of room for excess grease. The stainless steel grease drawer is easy to remove from the front of the unit for simple grease management. A 3-½” wide grease trough makes it easy to move grease into the drawer.
The cooking height of this unit is 11", adjustable 4” legs are included to make keeping it level simple.
This griddle requires 162,000 BTU/hr of gas input and comes with a ¾” rear gas connection. To power the electric ignition this unit has a NEMA 5-15 plug to connect it to 120v power.
Standard Features:
- Bottom heat shields
- Dual (manual/electric) ignition.
- Manual shut-off valve for gas inlet.
- One year limited parts and labor warranty.
- Heavy duty chromed thermostat knob guards.
- 11" low profile cooking height on 4" adjustable legs.
- ¾" rear gas connection and gas pressure regulator.
- Fully welded stainless and aluminized steel chassis frame.
- 120V 50/60Hz 1 Amp single phase with NEMA 5-15 USA plug.
- Stainless steel front, sides and front top ledge with “Cool Bullnose” design.
- Large 6 quart stainless steel grease drawer (2 drawers on 60" and 72" models).
- One 27,000 BTU/hr. “U” shaped aluminized steel burner for every 12" of griddle width.
- One embedded snap action thermostat per burner with temperature adjust from 200°F to 550°F.
- 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes.
- Spatula wide 3½" grease gutter and chute is fully welded for easier cleaning and to stop grease migration.
- One pilot safety valve for every two burners. Safety will completely shut off gas to pilot and burners if pilot extinguishes.
- 30" deep plate.
- Full or partially grooved griddle plate.
- Hexavalent chrome plated cooking surface.
- Stainless steel stand with marine edges and casters.
- Cutting board, condiment rail, plate rail and banking strip accessories.
Low profile heavy duty gas griddle. Stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel body frame. 11" low profile cooking height on 4" legs. 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes. Grease chute is fully welded to stop grease migration. One 27,000 BTU/hr. “U” shaped aluminized steel burner and mechanical snap action thermostat for each 12" of griddle width. Chrome thermostat knob guards. Temperature adjusts from 200° to 550° F. One pilot safety for every two burners. Manual shut-off valve. 3 ½" wide stainless steel grease trough. 120V 50/60Hz 1 Amp single phase electric ignition circuit. Plug type is NEMA 5-15 USA. ¾" rear gas connection and gas pressure regulator. CSA design certified. NSF listed.
Vulcan 972RX-30 Accessories
Vulcan 972RX-30 Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Vulcan 972RX-30 to Other Products
Items Related to Vulcan 972RX-30
