Vulcan 960RX 60'' Countertop Gas Griddle with Thermostatic Controls - 135,000 BTU
Calculate
Vulcan 960RX Specifications
| Plate Thickness | 1 Inch |
|---|---|
| Total BTU | 105000 - 156000 |
| Installation Type | Countertop |
| Burner Style | Griddle Top |
| Power Type | Natural Gas |
| Cooking Surface Material | Polished Steel |
| Construction | Stainless and Aluminized Steel |
| With Griddle | Yes |
| Brand | Vulcan |
| Griddle Plate Finish | Smooth Steel |
| Made in | USA |
| Certifications | NSF |
| Number of Burners | 4 |
| Control Type | Thermostatic |
| BTU | 135,000 BTU |
| Exterior Finish | Stainless Steel Front & Sides |
| Category | Griddle, Counter Unit, Gas |
| Controls | Thermostatic |
| Heat | Gas |
| Range Configuration | Griddle |
| Usage | Heavy Duty |
| Voltage | 120 Volts |
| Width (in) | 60 |
| Height (in) | 15.25 |
| Depth (in) | 31.5 |
| Weight | 650.00 |
Additional Information on Vulcan 960RX
warrantysheet.pdf 
sellsheet.pdf 
partslist.pdf 
servicemanual.pdf 
ownersmanual-french.pdf 
ownersmanual.pdf 
vulcan-960rxspecsheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 960RX Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 960RX Description
If your commercial kitchen needs a countertop griddle designed for heavy use, look no further than the Vulcan 960RX Heavy Duty Gas Griddle. This 60” wide griddle comes complete with thermostatic controls for precise temperature control over the griddle top to make sure cooking is as repeatable and simple as possible. The polished 1” thick steel griddle plate offers plenty of thermal mass to maintain the cooking temperature while distributing heat from the U-shaped burners evenly.
Precise control of the temperature is provided by five control knobs that can be set from 200°F to 550°F to get the results you need. To evenly apply heat to the griddle plate the five 27,000 BTU/hr U-shaped burners are spaced 12” apart. These burners feature manual and electric ignition and to keep users safe it comes standard with a pilot safety valve for each pair of burners.
To make sure this griddle stands up to commercial use it features a fully welded aluminized steel chassis and stainless steel construction for its front, sides, and front top ledge. Grease and crumbs that accumulate on the cooking surface are easily removed with a 3-½” wide trough and stored in two 6 qt. drawers made from stainless steel. To empty the grease drawers they are simple to remove from the front of the griddle.
This griddle is mounted on adjustable 4” legs to make keeping it level easy and its cooking height is 11".
The total required gas input of this griddle is 135,000 BTU/hr through its ¾” rear gas connection. Included with this unit is a NEMA 5-15 plug to connect it to standard 120-volt power.
Standard Features:
- Bottom heat shields
- Dual (manual/electric) ignition.
- Manual shut-off valve for gas inlet.
- One year limited parts and labor warranty.
- Heavy duty chromed thermostat knob guards.
- 11" low profile cooking height on 4" adjustable legs.
- ¾" rear gas connection and gas pressure regulator.
- Fully welded stainless and aluminized steel chassis frame.
- 120V 50/60Hz 1 Amp single phase with NEMA 5-15 USA plug.
- Stainless steel front, sides and front top ledge with “Cool Bullnose” design.
- Large 6 quart stainless steel grease drawer (2 drawers on 60" and 72" models).
- One 27,000 BTU/hr. “U” shaped aluminized steel burner for every 12" of griddle width.
- One embedded snap action thermostat per burner with temperature adjust from 200°F to 550°F.
- 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes.
- Spatula wide 3½" grease gutter and chute is fully welded for easier cleaning and to stop grease migration.
- One pilot safety valve for every two burners. Safety will completely shut off gas to pilot and burners if pilot extinguishes.
- 30" deep plate.
- Full or partially grooved griddle plate.
- Hexavalent chrome plated cooking surface.
- Stainless steel stand with marine edges and casters.
- Cutting board, condiment rail, plate rail and banking strip accessories.
Low profile heavy duty gas griddle. Stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel body frame. 11" low profile cooking height on 4" legs. 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes. Grease chute is fully welded to stop grease migration. One 27,000 BTU/hr. “U” shaped aluminized steel burner and mechanical snap action thermostat for each 12" of griddle width. Chrome thermostat knob guards. Temperature adjusts from 200° to 550° F. One pilot safety for every two burners. Manual shut-off valve. 3 ½" wide stainless steel grease trough. 120V 50/60Hz 1 Amp single phase electric ignition circuit. Plug type is NEMA 5-15 USA. ¾" rear gas connection and gas pressure regulator. CSA design certified. NSF listed.
Vulcan 960RX Accessories
Vulcan 960RX Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Vulcan 960RX to Other Products
Items Related to Vulcan 960RX
