Vulcan 960RX-30 60'' Countertop Gas Griddle with Thermostatic Controls - 135,000 BTU
Calculate
Vulcan 960RX-30 Specifications
| Plate Thickness | 1 Inch |
|---|---|
| Total BTU | 105000 - 156000 |
| Installation Type | Countertop |
| Power Type | Natural Gas |
| Cooking Surface Material | Polished Steel |
| Construction | Stainless and Aluminized Steel |
| With Griddle | Yes |
| Brand | Vulcan |
| Griddle Plate Finish | Smooth Steel |
| Made in | USA |
| Certifications | NSF |
| Number of Burners | 5 |
| Burner Style | U-Shaped |
| Control Type | Thermostatic |
| BTU | 135,000 BTU |
| Exterior Finish | Stainless Steel Front & Sides |
| Category | Griddle, Counter Unit, Gas |
| Controls | Thermostatic |
| Heat | Gas |
| Range Configuration | Griddle |
| Usage | Heavy Duty |
| Voltage | 120 Volts |
| Width (in) | 60 |
| Height (in) | 15.25 |
| Depth (in) | 37.5 |
| Weight | 650.00 |
Additional Information on Vulcan 960RX-30
parts-catalog.pdf 
parts-list.pdf 
owner-s-manual-french.pdf 
warranty-sheet.pdf 
owner-s-manual.pdf 
service-manual.pdf 
sell-sheet.pdf 
vulcan-960rx-30.specsheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 960RX-30 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 960RX-30 Description
The 960RX-30 Heavy Duty Gas Griddle from Vulcan is an easy pick for restaurants and commercial kitchens that need a heavy-duty countertop solution that runs on gas. This 60” wide griddle has thermostatic controls for accurate and easily repeatable cooking. To keep the temperature of the cooking surface consistent the griddle plate is made from 1” thick polished steel and heated with U-shaped burners. To provide additional griddling space without extending the width of the griddle this model features a 30” deep griddle plate.
With five control knobs, the temperature of separate cooking zones can be precisely controlled from 200°F to 550°F. The five U-shaped burners each consume 27,000 BTU/hr and are spaced 12” apart to evenly apply heat to the griddle plate. The burners are started with either manual or electric ignition and a pilot safety valve for every two burners.
To make sure this griddle stands up to commercial use it features a fully welded aluminized steel chassis and stainless steel construction for its front, sides, and front top ledge. Grease storage is provided by a pair of large 6 qt. stainless steel drawers that hold excess grease and debris from the cooking surface for disposal when it’s convenient. A 3-½” wide stainless steel grease trough is wide enough to accommodate spatulas.
To make keeping this griddle level on a counter simple it comes on adjustable 4” legs. The cooking height of this model is 11"
This griddle has a ¾” rear gas connection and requires 135,000 BTU/hr of gas input. Connecting this unit to a 120v outlet is done via the included NEMA 5-15P plug.
Standard Features:
- Bottom heat shields
- Dual (manual/electric) ignition.
- Manual shut-off valve for gas inlet.
- One year limited parts and labor warranty.
- Heavy duty chromed thermostat knob guards.
- 11" low profile cooking height on 4" adjustable legs.
- ¾" rear gas connection and gas pressure regulator.
- Fully welded stainless and aluminized steel chassis frame.
- 120V 50/60Hz 1 Amp single phase with NEMA 5-15 USA plug.
- Stainless steel front, sides and front top ledge with “Cool Bullnose” design.
- Large 6 quart stainless steel grease drawer (2 drawers on 60" and 72" models).
- One 27,000 BTU/hr. “U” shaped aluminized steel burner for every 12" of griddle width.
- One embedded snap action thermostat per burner with temperature adjust from 200°F to 550°F.
- 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes.
- Spatula wide 3½" grease gutter and chute is fully welded for easier cleaning and to stop grease migration.
- One pilot safety valve for every two burners. Safety will completely shut off gas to pilot and burners if pilot extinguishes.
- 30" deep plate.
- Full or partially grooved griddle plate.
- Hexavalent chrome plated cooking surface.
- Stainless steel stand with marine edges and casters.
- Cutting board, condiment rail, plate rail and banking strip accessories.
Low profile heavy duty gas griddle. Stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel body frame. 11" low profile cooking height on 4" legs. 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes. Grease chute is fully welded to stop grease migration. One 27,000 BTU/hr. “U” shaped aluminized steel burner and mechanical snap action thermostat for each 12" of griddle width. Chrome thermostat knob guards. Temperature adjusts from 200° to 550° F. One pilot safety for every two burners. Manual shut-off valve. 3 ½" wide stainless steel grease trough. 120V 50/60Hz 1 Amp single phase electric ignition circuit. Plug type is NEMA 5-15 USA. ¾" rear gas connection and gas pressure regulator. CSA design certified. NSF listed.
Vulcan 960RX-30 Accessories
Vulcan 960RX-30 Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Vulcan 960RX-30 to Other Products
Items Related to Vulcan 960RX-30
