Vulcan 948RX-30 48'' Countertop Gas Griddle with Thermostatic Controls - 108,000 BTU
Vulcan 948RX-30 Specifications
Plate Thickness | 1 Inch |
---|---|
Total BTU | 105000 - 156000 |
Installation Type | Countertop |
Power Type | Natural Gas |
Cooking Surface Material | Polished Steel |
Construction | Stainless and Aluminized Steel |
With Griddle | Yes |
Brand | Vulcan |
Griddle Plate Finish | Smooth Steel |
Made in | USA |
Certifications | NSF |
BTU | 108,000 BTU |
Number of Burners | 4 |
Burner Style | U-Shaped |
Control Type | Thermostatic |
Exterior Finish | Stainless Steel Front & Sides |
Category | Griddle, Counter Unit, Gas |
Controls | Thermostatic |
Heat | Gas |
Range Configuration | Griddle |
Usage | Heavy Duty |
Voltage | 120 Volts |
Width (in) | 48 |
Height (in) | 15.25 |
Depth (in) | 37.5 |
Weight | 480.00 |
Additional Information on Vulcan 948RX-30
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 948RX-30 Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 948RX-30 Description
The 48” wide griddle on the 948RX-30 Heavy Duty Gas Griddle from Vulcan is an easy pick for any operation that does a lot of griddling. This countertop model is a heavy-duty gas-heated model that features thermostatic controls to accurately cook food for easily repeatable results. The U-shaped burners apply efficient heat to the 1” thick polished steel griddle plate evenly without hot or cold spots. The thick griddle plate provides plenty of thermal mass that maintains the cooking temperature of the cooking surface for the best results. To provide additional griddling space without additional width the cooking surface is 30” in depth.
With four temperature control , this griddle provides accurate control over multiple zones and can be set from 200°F to 550°F to get the results you need. For even heat distribution the four 27,000 BTU/hr U-shaped burners are spaced 12” apart. Each pair of burners has one pilot safety valve to shut off gas to the pilot and burners if it’s extinguished. This model features both manual and electric ignition.
This griddle features a fully welded aluminized steel chassis for durability and stainless steel construction for the front, front top ledge, and sides making it easy to wipe down for cleaning. To make grease removal easy, this griddle features a 3-½” wide grease trough that empties into a 6 qt. stainless steel grease drawer that is easy to remove from the front or emptying whenever it’s convenient.
For easy leveling, this countertop griddle comes mounted on adjustable 4” legs and has a cooking height of 11".
This griddle has a ¾” rear gas connection and requires 108,000 BTU/hr of gas input. Connecting this unit to a 120v outlet is done via the included NEMA 5-15P plug.
Standard Features:
- Bottom heat shields
- Dual (manual/electric) ignition.
- Manual shut-off valve for gas inlet.
- One year limited parts and labor warranty.
- Heavy duty chromed thermostat knob guards.
- 11" low profile cooking height on 4" adjustable legs.
- ¾" rear gas connection and gas pressure regulator.
- Fully welded stainless and aluminized steel chassis frame.
- 120V 50/60Hz 1 Amp single phase with NEMA 5-15 USA plug.
- Stainless steel front, sides and front top ledge with “Cool Bullnose” design.
- Large 6 quart stainless steel grease drawer (2 drawers on 60" and 72" models).
- One 27,000 BTU/hr. “U” shaped aluminized steel burner for every 12" of griddle width.
- One embedded snap action thermostat per burner with temperature adjust from 200°F to 550°F.
- 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes.
- Spatula wide 3½" grease gutter and chute is fully welded for easier cleaning and to stop grease migration.
- One pilot safety valve for every two burners. Safety will completely shut off gas to pilot and burners if pilot extinguishes.
- 30" deep plate.
- Full or partially grooved griddle plate.
- Hexavalent chrome plated cooking surface.
- Stainless steel stand with marine edges and casters.
- Cutting board, condiment rail, plate rail and banking strip accessories.
Low profile heavy duty gas griddle. Stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel body frame. 11" low profile cooking height on 4" legs. 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes. Grease chute is fully welded to stop grease migration. One 27,000 BTU/hr. “U” shaped aluminized steel burner and mechanical snap action thermostat for each 12" of griddle width. Chrome thermostat knob guards. Temperature adjusts from 200° to 550° F. One pilot safety for every two burners. Manual shut-off valve. 3 ½" wide stainless steel grease trough. 120V 50/60Hz 1 Amp single phase electric ignition circuit. Plug type is NEMA 5-15 USA. ¾" rear gas connection and gas pressure regulator. CSA design certified. NSF listed.
Vulcan 948RX-30 Accessories
Vulcan 948RX-30 Reviews
There are no reviews yet for this product.