Vulcan 936RX 36'' Countertop Gas Griddle with Thermostatic Controls - 81,000 BTU
Calculate
Vulcan 936RX Specifications
| Plate Thickness | 1 Inch |
|---|---|
| Total BTU | 56000 - 104000 |
| BTU | 81,000 BTU |
| Installation Type | Countertop |
| Power Type | Natural Gas |
| Cooking Surface Material | Polished Steel |
| Construction | Stainless and Aluminized Steel |
| With Griddle | Yes |
| Brand | Vulcan |
| Griddle Plate Finish | Smooth Steel |
| Made in | USA |
| Certifications | NSF |
| Number of Burners | 4 |
| Burner Style | U-Shaped |
| Control Type | Thermostatic |
| Exterior Finish | Stainless Steel Front & Sides |
| Category | Griddle, Counter Unit, Gas |
| Controls | Thermostatic |
| Heat | Gas |
| Range Configuration | Griddle |
| Usage | Heavy Duty |
| Voltage | 120 Volts |
| Width (in) | 36 |
| Height (in) | 15.25 |
| Depth (in) | 31.5 |
| Weight | 400.00 |
Additional Information on Vulcan 936RX
corrections-sell-sheet.pdf 
parts-catalog.pdf 
msa-control-system.pdf 
owner-s-manual-french.pdf 
parts-list.pdf 
warranty-sheet.pdf 
owner-s-manual.pdf 
vulcan-936rx.specsheet.pdf 
service-manual.pdf 
sell-sheet.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 936RX Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 936RX Description
Are you looking for a countertop griddle that can keep up with your busy commercial kitchen’s needs? Flat Top Commercial grills & Griddles like the Vulcan 936RX Heavy Duty Gas Griddle coming in at 36” wide provide a great option that can keep up with the busiest kitchens. U-shaped burners apply even heat to the 1” thick polished steel griddle plate which provides plenty of thermal mass to keep the temperature of the cooking surface consistent without hot or cold spots. Vulcan’s Flat Top Grills & Griddles provide an excellent option for operators that need reliable high-quality equipment that just works.
The temperature of the griddle plate is adjusted from 200°F to 550°F with three simple to use embedded snap action thermostats. The three U-shaped burners each consume 27,000 BTU/hr and are spaced 12” apart to evenly apply heat to the griddle plate. The burners are started with either manual or electric ignition and a pilot safety valve for every two burners.
Stainless steel on the front, sides, and front top ledge makes it easy to wipe down the exterior of the griddle and makes sure it maintains its looks for many years. Internally, the chassis is made from fully welded aluminized steel for durability. Grease is easily removed from the griddle top through a 3-½” wide stainless steel trough and into a large 6 qt. stainless steel grease drawer. The drawer is easy to remove for emptying from the front of the unit.
The cooking height of this unit is 11", adjustable 4” legs are included to make keeping it level simple.
The total gas input of this griddle is 81,000 BTU/hr through the ¾” rear gas connection. To connect it to a 120v outlet a NEMA 5-15 plug is included.
Standard Features:
- Bottom heat shields
- Dual (manual/electric) ignition.
- Manual shut-off valve for gas inlet.
- One year limited parts and labor warranty.
- Heavy duty chromed thermostat knob guards.
- 11" low profile cooking height on 4" adjustable legs.
- ¾" rear gas connection and gas pressure regulator.
- Fully welded stainless and aluminized steel chassis frame.
- 120V 50/60Hz 1 Amp single phase with NEMA 5-15 USA plug.
- Stainless steel front, sides and front top ledge with “Cool Bullnose” design.
- Large 6 quart stainless steel grease drawer (2 drawers on 60" and 72" models).
- One 27,000 BTU/hr. “U” shaped aluminized steel burner for every 12" of griddle width.
- One embedded snap action thermostat per burner with temperature adjust from 200°F to 550°F.
- 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes.
- Spatula wide 3½" grease gutter and chute is fully welded for easier cleaning and to stop grease migration.
- One pilot safety valve for every two burners. Safety will completely shut off gas to pilot and burners if pilot extinguishes.
- 30" deep plate.
- Full or partially grooved griddle plate.
- Hexavalent chrome plated cooking surface.
- Stainless steel stand with marine edges and casters.
- Cutting board, condiment rail, plate rail and banking strip accessories.
Low profile heavy duty gas griddle. Stainless steel front, sides and front top ledge. Fully welded stainless and aluminized steel body frame. 11" low profile cooking height on 4" legs. 1" thick polished steel griddle plate with 12 gage, 4" stainless steel back and tapered side splashes. Grease chute is fully welded to stop grease migration. One 27,000 BTU/hr. “U” shaped aluminized steel burner and mechanical snap action thermostat for each 12" of griddle width. Chrome thermostat knob guards. Temperature adjusts from 200° to 550° F. One pilot safety for every two burners. Manual shut-off valve. 3 ½" wide stainless steel grease trough. 120V 50/60Hz 1 Amp single phase electric ignition circuit. Plug type is NEMA 5-15 USA. ¾" rear gas connection and gas pressure regulator. CSA design certified. NSF listed.
Vulcan 936RX Accessories
Vulcan 936RX Reviews
There are no reviews yet for this product.
Questions and Answers
Compare Vulcan 936RX to Other Products
Items Related to Vulcan 936RX
