Vulcan 4VK65AF PowerFry5™ (4) 65-70 lb. Fryers Gas Floor Fryer with Solid State Controls and KleenScreen PLUS® Filtration System, 120 Volts - 320,000 BTU
Chat Now
Vulcan 4VK65AF Specifications
Filtration System | KleenScreen PLUS® Filtration System |
---|---|
Series | PowerFry5™ |
Control Type | Solid State |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Battery | 4 |
Basket | Twin |
Basket Lifts | No |
BTU | 320,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Solid State |
Capacity | (4) 65-70 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 84 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 1136.00 |
Additional Information on Vulcan 4VK65AF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 4VK65AF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 4VK65AF Description
For commercial kitchens that need Commercial Deep Fryers that are dependable and extremely efficient, the Vulcan 4VK65AF PowerFry5™ Fryer is an excellent choice that offers four fryers that each hold 65-70 lbs, and a filtration system. These fryers are ENERGYSTAR® qualified and at the top of the list for the most efficient models available. The Floor Model Gas Fryers offered by Vulcan are some of the most reliable units on the market with a wide array of features that make operation simple.
Vulcan’s FivePass™ heat transfer system is revolutionary. Unlike most tube-fired fryers that have multiple burners with their own heat exchange tubes to distribute heat evenly, Vulcan’s approach uses a single large burner that splits off into two runs of heat exchange tubes that bend back and forth to increase the length of the heat exchange tubes while evenly heating oil with a larger surface area. This makes use of more of the thermal energy provided by the burning gas before being exhausted, basically recovering efficiency from something that would otherwise be wasted. Vulcan’s out of the box design yields this fryer with 78% thermal efficiency and 68% cooking efficiency, unheard of in other fryers. For even more efficiency, this fryer has a SoftStart™ ignition system that gradually heats the oil at a rate of 4,802 BTU/hr which extends the life of the oil and when idle the fryer only consumes 35,000 BTU/hr to maintain the cooking temperature.
To easily set the frying temperature, this fryer has a simple solid state analog knob behind the door with a range from 200° to 390°F. For convenience, an electronic ignition quickly gets the fryer started while fat melt modes take the guesswork out of bringing lard to a boil.
At the bottom of this fryer system, an 18 gauge stainless steel filter vessel houses the KleenScreen PLUS® filtration system made up of a stainless steel mesh filter. For further filtration of particles down to .5 microns, optional KleenScreen PLUS® filter envelopes are available. Filtration is done as quickly as possible with a ⅓ HP motor that circulates oil at a rate of 8 GPM.
The fry tank and cabinet are made from durable stainless steel to make sure this fryer stands up to daily use without issue. The fryer is easy to keep level thanks to the adjustable 6” casters which are handy for cleaning and maintenance tasks. Other equipment supplied with this fryer include twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod.
This fryer is designed to use a total gas input of 320,000 BTU/hr and comes with a NEMA 5-15P cord and plug to connect it to 120v power.
- Hi-limit shut-off.
- 80,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,802 BTU/hr. to save energy.
- Stainless steel fry tank, 65 - 70 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency.
- FRYMATE-VX15 add-on frymate.
- Set of twin baskets – 9 1⁄4"w x 13 1⁄4"d x 6"h.
- 3⁄4" Flexible gas hose with quick disconnect.
- Single large basket – 18 3⁄4"w x 13 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover – doubles as a work surface top.
- Connecting Kit(s) – Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
- 21"w x 34 3⁄8"d x 47 1⁄8"h. Working height 36 1⁄4".
- Natural Gas.
- Propane Gas.
- The 1VK65 Series fryer does not require any special adjustments for varying altitudes ranging from 0 - 10,000 feet for either Natural or Propane gas.
65 - 70 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK65A) (1VK65D) (1VK65C). 80,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,802 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 4VK65AF Accessories
Vulcan 4VK65AF Reviews
There are no reviews yet for this product.