Vulcan 4TR45DF PowerFry3™ (4) 45-50 lb. Fryers Gas Floor Fryer with Digital Controls and KleenScreen PLUS® Filtration System, 120 Volts - 280,000 BTU

If you’re looking for a quad fryer system complete with filtration, the 4TR45DF PowerFry3™ Fryer from Vulcan is an incredibly efficient model that can easily keep up with the demands of a commercial kitchen. Each fryer has a fry tank that holds up to 45-50 lbs of oil. The Commercial Deep Fryers in this system are ENERGYSTAR® qualified and are among the most energy-efficient models available. The Floor Model Gas Fryers in Vulcan’s lineup have been thoroughly developed to meet the needs of a variety of use cases to provide operators with the right piece of equipment for their needs.

Vulcan’s ThreePass™ heat transfer system is revolutionary. Unlike most tube-fired fryers that have multiple burners with their own heat exchange tubes to distribute heat evenly, Vulcan’s approach uses a single large burner that splits off into two runs of heat exchange tubes that bend back and forth to increase the length of the heat exchange tubes while evenly heating oil with a larger surface area. This makes use of more of the thermal energy provided by the burning gas before being exhausted, basically recovering efficiency from something that would otherwise be wasted. The groundbreaking design of the heat transfer system yields each fryer with 72% thermal efficiency and 60% cooking efficiency. To maintain the oil temperature at idle these fryers each only use 4,318 BTU/hr and to extend the life of oil the SoftStart™ ignition system lowers the burn rate to 35,000 BTU/hr to gradually apply heat.

These fryer come with digital controls with accurate temperature control from 200° to 390°F for fast recovery. Two count-down timer can be used to cook with either compensating time or actual time. The electronic ignition, boil-out mode, and three melt modes make this fryer even simpler to use.

The stainless steel mesh KleenScreen PLUS® filtration system in this fryer system is housed inside an 18 gauge stainless steel filter vessel. For additional filtration efficiency optional KleenScreen PLUS® envelopes are available to filter out particles down to .5 microns. Filtration is done as quickly as possible with a ⅓ HP motor that circulates oil at a rate of 8 GPM.

The stainless steel construction of the cabinets and fry tanks make these fryers durable and easy to clean. Included with this fryer system are adjustable 6” casters, a clean-out rod, tank brush, and twin fry baskets with plastic coated handles.

The total gas input required by this fryer system is 280,000 BTU/hr and it comes with a NEMA 5-15P cord and plug to connect it to a 120v outlet.