Vulcan 2VK85AF PowerFry5™ (2) 85-90 lb. Fryers Gas Floor Fryer with Solid State Controls and KleenScreen PLUS® Filtration System, 120 Volts - 180,000 BTU

Operators that need a dual-fryer setup with Commercial Deep Fryers that hold 85-90 lbs of oil are well served by the 2VK85AF PowerFry5™ Fryer from Vulcan. This gas-fired fryer system is extremely efficient and comes with filtration to keep operational costs as low as possible. The fryers in this system are ENERGYSTAR® qualified and are among the most energy-efficient models available. If you’re looking at Floor Model Gas Fryers that are designed from the ground up for efficiency, ease of use, and durability; Vulcan’s fryers have a lot to offer.

Vulcan’s FivePass™ heat transfer system is a game-changer. Unlike other fryers with multiple straight heat exchange tubes each with a burner, Vulcan’s design uses a single large burner connected to heat exchange tubes that bend back and forth providing more surface area to transfer heat to oil more effectively. In effect, this reduces the amount of gas necessary to heat the oil effectively. Vulcan’s out of the box design yields this fryer with 78% thermal efficiency and 68% cooking efficiency, unheard of in other fryers. For even more efficiency, this fryer has a SoftStart™ ignition system that gradually heats the oil at a rate of 35,000 BTU/hr which extends the life of the oil and when idle the fryer only consumes 6,298 BTU/hr to maintain the cooking temperature.

Controlling the cooking temperature on this fryer is simple with a solid state analog knob behind the door which can set temperatures from 200° to 390°F. This fryer features users selectable fat melt modes and electronic ignition.

This fryer system’s KleenScreen PLUS® features a stainless steel mesh filter to remove most particles, but for more thorough filtration you can order optional KleenScreen PLUS® envelopes that will filter out particulates down to .5 microns. The filtration system is housed inside an 18 gauge stainless steel filter vessel. Filtration is done as quickly as possible with a ⅓ HP motor that circulates oil at a rate of 8 GPM.

The cabinet and fry tank of this fryer is made from stainless steel for durability ad ease of maintenance. The 6” casters included with this fryer make it easy to move around for maintenance and cleaning. The casters are also adjustable to make sure the fryer is always level. A tank brush, twin fry baskets with plastic coated handles, and a clean-out rod are also included.

A NEMA 5-15P cord and plug are included to connect the fryer to a 120-volt outlet and in total 180,000 BTU/hr of gas input is required.