Vulcan 4TR45CF PowerFry3™ (4) 45-50 lb. Fryers Gas Floor Fryer with Computer Controls and KleenScreen PLUS® Filtration System, 120 Volts - 280,000 BTU

Operators that need a 4-fryer setup with Commercial Deep Fryers that hold 45-50 lbs of oil are well served by the 4TR45CF PowerFry3™ Fryer from Vulcan. This gas-fired fryer system is extremely efficient and comes with filtration to keep operational costs as low as possible. These fryers are ENERGYSTAR® qualified and are among the most energy-efficient models you can buy. Vulcan’s range of Floor Model Gas Fryers are chocked full of features that make them more reliable, easier to use, and easier to maintain based on years of use and development.

At the heart of this fryer is the ThreePass™ heat transfer system which looks like the exhaust header on a high-performance car. The bends on the gas tube provide more surface area for heat transfer without needing to burn additional gas in the process. This design yields 60% cooking efficiency and 72% thermal efficiency. To extend the life of oil, this fryer features SoftStart™ which uses only 35,000 BTU/hr when warming up oil. At Idle this fryer only uses 4,318 BTU/hr to maintain the cooking temperature.

To make sure menu items are cooked consistently every time, this fryer has programmable computer controls with a digital character display. Up to 10 menu items can be set up with a simple USB interface making updating the items user-friendly. The name of the menu item and the remaining time is displayed so users can quickly identify the items being fried. The temperature is accurately controlled between 200°F and 390°F for quick recovery and cooking can be done with either compensating time or actual time. This fryer’s electronic ignition and three melt modes make it easy to use.

With the KleenScreen PLUS®, this fryer system has a stainless steel mesh filter to remove larger particles. However, to filter out particles down to .5 microns the optional KleenScreen PLUS® filter envelopes must be ordered. The filtration system is held inside a seamless 18 gauge stainless steel filter vessel. A ⅓ HP filter motor makes sure filtration is quick to minimize downtime with a ⅓ HP pump.

The cabinet and fry tank of this fryer is made from stainless steel for durability ad ease of maintenance. The 6” casters included with this fryer make it easy to move around for maintenance and cleaning. The casters are also adjustable to make sure the fryer is always level. A tank brush, twin fry baskets with plastic coated handles, and a clean-out rod are also included.

This fryer is designed to use a total gas input of 280,000 BTU/hr and comes with a NEMA 5-15P cord and plug to connect it to 120v power.