Vulcan 4VK45DF PowerFry5™ (4) 45-50 lb. Fryers Gas Floor Fryer with Digital Controls and KleenScreen PLUS® Filtration System, 120 Volts - 280,000 BTU
Chat Now
Vulcan 4VK45DF Specifications
Control Type | Digital |
---|---|
Filtration System | KleenScreen PLUS® Filtration System |
Series | PowerFry5™ |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Battery | 4 |
Basket | Twin |
Basket Lifts | No |
BTU | 280,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Digital |
Capacity | (4) 45-50 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 62 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 871.00 |
Additional Information on Vulcan 4VK45DF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 4VK45DF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 4VK45DF Description
The 4VK45DF PowerFry5™ Fryer from Vulcan is a four-fryer system with 45-50 lb capacity Commercial Deep Fryers designed to keep up with a commercial kitchen’s demands while saving operators on operational costs with an energy-efficient gas-fired system and a filtration system. These deep fryers are ENERGYSTAR® qualified and some of the most energy-efficient models you can find on the market. Floor Model Gas Fryers from Vulcan are designed to be incredibly reliable, efficient, and user friendly.
Most tube-fired fryers use multiple burners each in their own heat exchange tube. This evenly distributes heat but a lot of heat is wasted and is vented from the fryer immediately. Vulcan’s FivePass™ heat transfer takes a different approach, a single burner that branches off into two heat exchange tubes that bend back and forth to extend the length of the heat exchange tubes to heat oil evenly while harnessing more of the heat from the burned gas that would otherwise be unused. With 68% cooking efficiency and 78% thermal efficiency, this fryer is much better than other fryers on the market at harnessing the heat of burning gas. This fryer features a SoftStart™ ignition system that only uses 35,000 BTU/hr of gas at start up to gradually heat oil without breaking it down which will extend its life. When this fryer is idle it only burns 4,251 BTU/hr of gas to maintain the cooking temperature.
The digital controls on this fryer feature a digital display that shows the temperature accurately and the cooking temperature can be set between 200° and 390°F. Two count-down timers allow for cooking with compensating time or actual time. Thanks to auto boil-out mode, three melt modes and electronic ignition, this fryer is extremely easy to use.
This fryer system’s KleenScreen PLUS® features a stainless steel mesh filter to remove most particles, but for more thorough filtration you can order optional KleenScreen PLUS® envelopes that will filter out particulates down to .5 microns. The filtration system is housed inside an 18 gauge stainless steel filter vessel. To make sure filtration is done as quickly as possible oil is circulated at a rate of 8 GPM by a ⅓ HP pump motor.
The stainless steel construction of the cabinet and fry tank make this fryer durable and easy to clean. The 6” casters included with this fryer make it easy to move around for maintenance and cleaning. The casters are also adjustable to make sure the fryer is always level. A tank brush, twin fry baskets with plastic coated handles, and a clean-out rod are also included.
This fryer requires a total input of 280,000 BTU/hr and comes with a NEMA 5-15P cord and plug.
- Hi-limit shut-off.
- 70,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,251 BTU/hr. to save energy.
- Stainless steel fry tank, 45 - 50 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency.
- FRYMATE-VX15 add-on frymate.
- Set of twin baskets – 6 1⁄2"w x 13 1⁄4"d x 6"h.
- 3⁄4" Flexible gas hose with quick disconnect.
- Single large basket – 13"w x 13 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover – doubles as a work surface top.
- Connecting Kit(s) – Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
- 15 1⁄2"w x 34 3⁄8"d x 47 1⁄8"h. Working height 36 1⁄4".
- Natural Gas.
- Propane Gas.
- The 1VK45 Series fryer does not require any special adjustments for varying altitudes ranging from 0 - 10,000 feet for either Natural or Propane gas.
45 - 50 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK45A) (1VK45D) (1VK45C). 70,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,251 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 4VK45DF Accessories
Vulcan 4VK45DF Reviews
There are no reviews yet for this product.