Vulcan 4GR45MF Hart Model (4) 45-50 lb. Fryers Gas Floor Fryer with Millivolt Thermostatic Controls and KleenScreen PLUS® Filtration System, 120 Volts - 480,000 BTU
Calculate
Vulcan 4GR45MF Specifications
| Series | Hart Model |
|---|---|
| Filtration System | KleenScreen PLUS® Filtration System |
| Control Type | Millivolt Thermostatic |
| Cabinet | Stainless Steel |
| Brand | Vulcan |
| Fry Pot | Stainless Steel |
| Made in | USA |
| Certifications | NSF |
| Battery | 4 |
| Basket | Twin |
| Basket Lifts | No |
| BTU | 480,000 BTU |
| Exterior Finish | Stainless Steel Front & Sides |
| Controls | Мillivolt thermostat |
| Capacity | (4) 45-50 lb. Fryers |
| Voltage | 120 Volts |
| Width (in) | 62 |
| Height (in) | 46.25 |
| Depth (in) | 30.13 |
| Weight | 927.00 |
Additional Information on Vulcan 4GR45MF
fry-tank-warranty.pdf 
parts-catalog.pdf 
warranty.pdf 
service-manual.pdf 
parts-list.pdf 
sell-sheet.pdf 
warranty-sheet.pdf 
vulcan-4gr45mf.specsheet.pdf 
brochure.pdf 
owner-s-manual.pdf A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 4GR45MF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 4GR45MF Description
The 4GR45MF Fryer from Vulcan is a four fryer battery with 45-50 lb capacity fry pots and filtration designed for reliable use in a commercial kitchen. If you’re in the market for Floor Model Gas Fryers you can’t go wrong with this offering from Vulcan.
Oil is heated evenly with four heat exchanger tubes in the fry tank. These tubes are easy to remove to make cleaning as simple as possible. To trap crumbs and debris and prevent carbonization the fry tank features a V-shaped cool zone. This maintains the quality of the oil for longer periods.
The frying oil temperature can be set between 200°F and 400°F with a simple to use millivolt thermostat protected by the door.
The built-in filtration system in this fryer system features an 18 gauge stainless steel filter vessel with the KleenScreen PLUS® filtration system that utilizes a stainless steel mesh to remove larger particles. For more thorough filtration removing particles larger than .5 microns, optional KleenScreen PLUS® envelopes can be used. To make sure filtration is done as quickly as possible oil is circulated at a rate of 8 GPM by a ⅓ HP pump motor.
This fryer is designed to stand up to the rigors of daily commercial use with a stainless steel cabinet and fry tank. The fryer is easy to keep level thanks to the adjustable 6” casters which are handy for cleaning and maintenance tasks. Other equipment supplied with this fryer include twin fry baskets with plastic coated handles, a stainless steel crumb scoop, a tank brush, and a clean-out rod.
This fryer is designed to use a total gas input of 480,000 BTU/hr and uses standard 120v power.
- Hi-limit shut-off.
- 120,000 BTU/hr. input.
- Stainless steel cabinet.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable casters (2 locking).
- Twin fry baskets with plastic coated handles.
- Four heat exchanger tubes positioned for easy cleaning.
- Combination gas shut-off valve and pilot ignition system.
- Tank brush, stainless steel crumb scoop and clean-out rod.
- Stainless steel fry tank, 45 - 50 lb. capacity. Includes limited 10 year tank warranty.
- FRYMATE-VX15 add-on frymate.
- Set of twin baskets – 6 1⁄2"w x 13 1⁄4"d x 6"h.
- 3⁄4" Flexible gas hose with quick disconnect.
- Single large basket – 13"w x 13 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover – doubles as a work surface top.
- Connecting Kit(s) – Connects two Commercial Deep Fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
- 15 1⁄2"w x 30 1⁄4"d x 47 1⁄8"h. Working height 36 1⁄4".
- Natural Gas.
- Propane Gas.
- Natural Gas for above 2000 ft.
- Propane Gas for above 3500 ft.
45 - 50 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1GR45M) (1GR45D) (1GR45C). Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with four heat exchanger tubes and a “V” shaped cold zone. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. 120,000 BTU/hr. input. Millivolt (M), solid state analog knob (A), solid state digital (D), or programmable computer (C) control system. Electronic ignition standard with solid state and computer control models. Tank brush, stainless steel crumb scoop and clean-out rod. CSA design certified. NSF listed
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 4GR45MF Accessories
Vulcan 4GR45MF Reviews
There are no reviews yet for this product.
Questions and Answers
Items Related to Vulcan 4GR45MF
