Vulcan 4TR65DF PowerFry3™ (4) 65-70 lb. Fryers Gas Floor Fryer with Digital Controls and KleenScreen PLUS® Filtration System, 120 Volts - 280,000 BTU
Chat Now
Vulcan 4TR65DF Specifications
Control Type | Digital |
---|---|
Filtration System | KleenScreen PLUS® Filtration System |
Series | PowerFry3™ |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Battery | 4 |
Basket | Twin |
Basket Lifts | No |
BTU | 280,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Digital |
Capacity | (4) 65-70 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 84 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 1136.00 |
Additional Information on Vulcan 4TR65DF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 4TR65DF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 4TR65DF Description
For operators looking for a four-fryer system with fry tanks that each hold 65-70 lbs of oil, the Vulcan 4TR65DF PowerFry3™ Fryer is one of the best options on the market. This fryer system comes with a built-in filtration system and an efficient gas-fired heat transfer system that will keep operational costs as low as possible. These Commercial Deep Fryers are at the top of the ENERGYSTAR® qualification list for efficiency. If you’re looking at Floor Model Gas Fryers that are designed from the ground up for efficiency, ease of use, and durability; Vulcan’s fryers have a lot to offer.
At first glance Vulcan’s ThreePass™ heat transfer system looks like someone pulled the exhaust header from a muscle car and dropped it into a deep fryer. While Vulcan may have taken inspiration from automotive design, it’s for good reason. Instead of having multiple burners in straight heat exchange tubes like in most fryers, they went back to the drawing board and came up with a design that uses a large single burner that splits off into two heat exchange tubes that bend back and forth to increase the effective length of the heat exchange tubes to make better use of the heat generated by the burner, all while evenly distributing heat to the oil. Thanks to the revolutionary design, this fryer has 72% thermal efficiency and 60% cooking efficiency and while idle it only consumes 5,083 BTU/hr to maintain the cooking temperature. To prevent the oil from breaking down prematurely the SoftStart™ ignition system only uses 80,000 BTU/hr at startup to gently get oil to temperature.
This fryer features digital controls that accurately display the cooking temperature which can be set from 200° to 390°F. The system has two count-down timers and can cook with either actual time or compensating time. Three melt modes, auto-boil-out mode and electronic ignition make this fryer easy to use.
To maintain the quality of the oil for extended periods, this fryer system has the KleenScreen PLUS® filtration system that utilizes a stainless steel mesh filter. The filtration system is kept inside an 18 gauge stainless steel filter vessel and particles down to .5 microns can be filtered out with the use of optional KleenScreen PLUS® filter envelopes. To keep filtration time to a minimum, oil is moved by a ⅓ HP pump motor at a rate of 8 GPM.
The fry tank and cabinet are made from durable stainless steel to make sure this fryer stands up to daily use without issue. Moving this fryer around is easy with the adjustable 6” casters which also make keeping it level simple. Twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod are also included for convenience.
A NEMA 5-15P cord and plug is included to connect the fryer to a 120 volt outlet and in total 320,000 BTU/hr of gas input is required.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 4TR65DF Accessories
Vulcan 4TR65DF Reviews
There are no reviews yet for this product.