Vulcan 4VK85DF PowerFry5™ (4) 85-90 lb. Fryers Gas Floor Fryer with Digital Controls and KleenScreen PLUS® Filtration System, 120 Volts - 360,000 BTU
Chat Now
Vulcan 4VK85DF Specifications
Control Type | Digital |
---|---|
Filtration System | KleenScreen PLUS® Filtration System |
Series | PowerFry5™ |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Made in | USA |
Certifications | NSF |
Battery | 4 |
Basket | Twin |
Basket Lifts | No |
BTU | 360,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Digital |
Capacity | (4) 85-90 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 84 |
Height (in) | 47.25 |
Depth (in) | 34.38 |
Weight | 1236.00 |
Additional Information on Vulcan 4VK85DF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 4VK85DF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 4VK85DF Description
Operators that need a four-fryer setup with Commercial Deep Fryers that hold 85-90 lbs of oil are well served by the 4VK85DF PowerFry5™ Fryer from Vulcan. This gas-fired fryer system is extremely efficient and comes with filtration to keep operational costs as low as possible. These energy-efficient fryers are at the top of the ENERGYSTAR® qualification list as some of the most efficient deep fryers available. If you’re in the market for Floor Model Gas Fryers you can’t go wrong with this offering from Vulcan.
Vulcan’s FivePass™ heat transfer system is a game-changer. Unlike other fryers with multiple straight heat exchange tubes each with a burner, Vulcan’s design uses a single large burner connected to heat exchange tubes that bend back and forth providing more surface area to transfer heat to oil more effectively. In effect, this reduces the amount of gas necessary to heat the oil effectively. The innovative design of the burner and heat exchange system yields this fryer with 78% thermal efficiency and 68% cooking efficiency, which is leagues ahead of other fryers on the market. When idling, this fryer only consumes 6,298 BTU/hr of gas to maintain the cooking temperature. To reduce thermal shock to the oil at startup, the SoftStart™ ignition system uses 35,000 BTU/hr of gas and gradually applies heat to the oil which will prolong its life.
This fryer comes with digital controls with accurate temperature control from 200° to 390°F for fast recovery. Two count-down timer can be used to cook with either compensating time or actual time. The electronic ignition, boil-out mode, and three melt modes make this fryer even simpler to use.
This fryer system’s KleenScreen PLUS® filtration system uses a stainless steel mesh to remove most particles. The filtration system is protected by a filter vessel made from 18 gauge stainless steel. If you need to filter out particles down to .5 microns, optional KleenScreen PLUS® filter envelopes can be ordered. Filtration is done as quickly as possible with a ⅓ HP motor that circulates oil at a rate of 8 GPM.
Cleaning and maintenance of the fryer is easy with stainless steel construction of the cabinet and fry tank. The 6” casters included with this fryer make it easy to move around for maintenance and cleaning. The casters are also adjustable to make sure the fryer is always level. A tank brush, twin fry baskets with plastic coated handles, and a clean-out rod are also included.
The total gas input of this fryer is 360,000 BTU/hr and comes complete with a NEMA 5-15P cord and plug to connect it to a 120v outlet.
- Hi-limit shut-off.
- 90,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 6,298 BTU/hr. to save energy.
- Stainless steel fry tank, 85 - 90 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 65% cooking and 78% thermal efficiency.
- FRYMATE-VX21S add-on frymate.
- Set of twin baskets – 8 3⁄4"w x 16 3⁄4"d x 6"h.
- 3⁄4" Flexible gas hose with quick disconnect.
- Single large basket – 18 3⁄4"w x 17 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover – doubles as a work surface top.
- Connecting Kit(s) – Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
- 21"w x 34 3⁄8"d x 47 1⁄8"h. Working height 36 1⁄4".
- Natural Gas.
- Propane Gas.
- The 1VK85 Series fryer does not require any special adjustments for varying altitudes ranging from 0 - 10,000 feet for either Natural or Propane gas.
85 - 90 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK85A) (1VK85D) (1VK85C). 90,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 65% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 6,298 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 4VK85DF Accessories
Vulcan 4VK85DF Reviews
There are no reviews yet for this product.