Vulcan 4TR65CF PowerFry3™ (4) 65-70 lb. Fryers Gas Floor Fryer with Computer Controls and KleenScreen PLUS® Filtration System, 120 Volts - 280,000 BTU

PowerFry3™ Fryer, gas, high efficiency, 84" W, (4) battery, 65-70 lbs. capacity per vat, programmable computer control with melt cycles, ThreePass™ heat transfer system, electronic ignition, KleenScreen PLUS® filtration system, twin baskets, stainless steel cabinet & fry tank, adjustable casters (2 swivel locking & 2 non-locking), 280,000 BTU, CSA, NSF, ENERGY STAR®

The Vulcan 4TR65CF PowerFry3™ Fryer is a gas-heated four-fryer system with 65-70 lb Commercial Deep Fryers designed to keep up with demands while keeping operational costs as low as possible with an energy-efficient heat transfer system and built-in filtration. These fryers are ENERGYSTAR® qualified and at the top of the list for the most efficient models available. The Floor Model Gas Fryers in Vulcan’s lineup have been thoroughly developed to meet the needs of a variety of use cases to provide operators with the right piece of equipment for their needs.

At first glance Vulcan’s ThreePass™ heat transfer system looks like someone pulled the exhaust header from a muscle car and dropped it into a deep fryer. While Vulcan may have taken inspiration from automotive design, it’s for good reason. Instead of having multiple burners in straight heat exchange tubes like in most fryers, they went back to the drawing board and came up with a design that uses a large single burner that splits off into two heat exchange tubes that bend back and forth to increase the effective length of the heat exchange tubes to make better use of the heat generated by the burner, all while evenly distributing heat to the oil. The groundbreaking design of the heat transfer system yields this fryer with 72% thermal efficiency and 60% cooking efficiency. To maintain the oil temperature at idle each fryer only uses 5,083 BTU/hr and to extend the life of oil the SoftStart™ ignition system lowers the burn rate to  40,000 BTU/hr to gradually apply heat.

With programmable computer controls, this fryer allows users to easily select a menu item from the up to ten programmable selections. A digital display shows users the item names and cook times for quick reference. Programming the fryer is simple via a USB interface making it easy to update multiple fryers with the same parameters. The temperature can be set accurately between 200°F and 390°F with fast recovery time and cook time can be based on actual time or compensating time. Conveniently this fryer has three melt modes and electronic ignition, 

The built-in filtration system in this fryer system features an 18 gauge stainless steel filter vessel with the KleenScreen PLUS® filtration system that utilizes a stainless steel mesh to remove larger particles. For more thorough filtration removing particles larger than .5 microns, optional KleenScreen PLUS® envelopes can be used. Filtration is done quickly at a rate of 8 GPM thanks to a ⅓ HP pump motor.

The fry tanks and cabinets are made from durable stainless steel to make sure this fryer stands up to daily use without issue. The fryer is easy to keep level thanks to the adjustable 6” casters which are handy for cleaning and maintenance tasks. Other equipment supplied with this fryer setup include twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod.

This fryer system requires a total input of 320,000 BTU/hr and comes with a NEMA 5-15P cord and plug.