Vulcan 2VK85CF PowerFry5™ (2) 85-90 lb. Fryers Gas Floor Fryer with Computer Controls and KleenScreen PLUS® Filtration System, 120 Volts - 180,000 BTU
Chat Now
Vulcan 2VK85CF Specifications
Control Type | Computer |
---|---|
Filtration System | KleenScreen PLUS® Filtration System |
Series | PowerFry5™ |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Battery | 2 |
Certifications | NSF |
Basket | Twin |
Basket Lifts | No |
BTU | 180,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Computer |
Capacity | (2) 85-90 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 42 |
Height (in) | 47.25 |
Depth (in) | 34.38 |
Weight | 700.00 |
Additional Information on Vulcan 2VK85CF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 2VK85CF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 2VK85CF Description
If you’re looking for a fryer system with dual Commercial Deep Fryers offering 85-90 lb capacity fry pots complete with a filtration system, the 2VK85CF PowerFry5™ Fryer from Vulcan is an easy pick that is extremely durable and efficient. These fryers are at the top of the ENERGYSTAR® qualification list for efficiency. To keep up with high volume frying Floor Model Gas Fryers from Vulcan are an easy pick. The Floor Model Gas Fryers in Vulcan’s lineup have been thoroughly developed to meet the needs of a variety of use cases to provide operators with the right piece of equipment for their needs.
Vulcan’s FivePass™ heat transfer system is a game-changer. Unlike other fryers with multiple straight heat exchange tubes each with a burner, Vulcan’s design uses a single large burner connected to heat exchange tubes that bend back and forth providing more surface area to transfer heat to oil more effectively. In effect, this reduces the amount of gas necessary to heat the oil effectively. With 68% cooking efficiency and 78% thermal efficiency, this fryer is much better than other fryers on the market at harnessing the heat of burning gas. This fryer features a SoftStart™ ignition system that only uses 35,000 BTU/hr of gas at start up to gradually heat oil without breaking it down which will extend its life. When this fryer is idle it only burns 6,298 BTU/hr of gas to maintain the cooking temperature.
The computer controls featured on this fryer make it as easy as possible for anyone to get consistent results with up to ten menu items. With a digital display showing the product names and cooking times, it’s simple for users to select the right menu item. Programming is easily done with a USB interface making it simple to update multiple fryers. Temperatures can be set from 200°F to 390°F with quick recovery and cooking can be based on actual time or compensating time. The electronic ignition and three melt modes on this fryer make it convenient to use.
This fryer system’s KleenScreen PLUS® features a stainless steel mesh filter to remove most particles, but for more thorough filtration you can order optional KleenScreen PLUS® envelopes that will filter out particulates down to .5 microns. The filtration system is housed inside an 18 gauge stainless steel filter vessel. To keep filtration time to a minimum, oil is moved by a ⅓ HP pump motor at a rate of 8 GPM.
Stainless steel construction of the cabinet and fry tank make sure cleaning and maintenance are as easy as possible. This fryer comes standard with adjustable 6” casters to make it easy to move around for cleaning and maintenance. It also comes with a clean-out rod, twin fry baskets with plastic coated handles, and a tank brush.
To power this fryer it needs 180,000 BTU/hr of gas input and a 120v NEMA 5-15P cord and plug are included.
Standard Features:
- Hi-limit shut-off.
- 90,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 6,298 BTU/hr. to save energy.
- Stainless steel fry tank, 85 - 90 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 65% cooking and 78% thermal efficiency.
- FRYMATE-VX21S add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 8 3⁄4"w x 16 3⁄4"d x 6"h.
- 10" high stainless steel removable splash guard.
- Single large basket - 18 3⁄4"w x 17 1⁄4"d x 5 1⁄2"h.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
85 - 90 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK85A) (1VK85D) (1VK85C). 90,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 65% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 6,298 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 2VK85CF Accessories
Vulcan 2VK85CF Reviews
There are no reviews yet for this product.