Vulcan 3VK65AF PowerFry5™ (3) 65-70 lb. Fryers Gas Floor Fryer with Solid State Controls and KleenScreen PLUS® Filtration System, 120 Volts - 240,000 BTU
Chat Now
Vulcan 3VK65AF Specifications
Filtration System | KleenScreen PLUS® Filtration System |
---|---|
Series | PowerFry5™ |
Control Type | Solid State |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Battery | 3 |
Basket | Twin |
Basket Lifts | No |
BTU | 240,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Solid State |
Capacity | (3) 65-70 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 63 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 916.00 |
Additional Information on Vulcan 3VK65AF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 3VK65AF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 3VK65AF Description
The Vulcan 3VK65AF PowerFry5™ Fryer is a gas-heated three-fryer system with 65-70 lb Commercial Deep Fryers designed to keep up with demands while keeping operational costs as low as possible with an energy-efficient heat transfer system and built-in filtration. The efficiency of these fryers puts them at the top of the ENERGYSTAR® qualification list. Vulcan Floor Model Gas Fryers are used in commercial kitchens around the world for their reliability and ease of use.
At first glance Vulcan’s FivePass™ heat transfer system looks like someone pulled the exhaust header from a muscle car and dropped it into a deep fryer. While Vulcan may have taken inspiration from automotive design, it’s for good reason. Instead of having multiple burners in straight heat exchange tubes like in most fryers, they went back to the drawing board and came up with a design that uses a large single burner that splits off into two heat exchange tubes that bend back and forth to increase the effective length of the heat exchange tubes to make better use of the heat generated by the burner, all while evenly distributing heat to the oil. The groundbreaking design of the heat transfer system yields this fryer with 78% thermal efficiency and 68% cooking efficiency. To maintain the oil temperature at idle this fryer only uses 4,802 BTU/hr and to extend the life of oil the SoftStart™ ignition system lowers the burn rate to 35,000 BTU/hr to gradually apply heat.
The cooking temperature is easily adjusted with a simple analog knob behind the door which allows for temperatures from 200° to 390°F. User-selectable fat melt modes and electronic ignition make this fryer easy to use.
This fryer system’s KleenScreen PLUS® filtration system uses a stainless steel mesh to remove most particles. The filtration system is protected by a filter vessel made from 18 gauge stainless steel. If you need to filter out particles down to .5 microns, optional KleenScreen PLUS® filter envelopes can be ordered. To make sure filtration is done as quickly as possible oil is circulated at a rate of 8 GPM by a ⅓ HP pump motor.
The cabinet and fry tank are made from stainless steel for durability while making it easy to clean. Moving this fryer around is easy with the adjustable 6” casters which also make keeping it level simple. Twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod are also included for convenience.
A NEMA 5-15P cord and plug are included to connect the fryer to a 120-volt outlet and in total 240,000 BTU/hr of gas input is required.
Standard Features:
- Hi-limit shut-off.
- 80,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,802 BTU/hr. to save energy.
- Stainless steel fry tank, 65 - 70 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency. ENERGY STAR® certified.
- FRYMATE-VX15 add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 9 1⁄4"w x 13 1⁄4"d x 6"h.
- 10" high stainless steel removable splash guard.
- Single large basket - 18 3⁄4"w x 13 1⁄4"d x 5 1⁄2"h.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
65 - 70 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK65A) (1VK65D) (1VK65C). 80,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,802 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 3VK65AF Accessories
Vulcan 3VK65AF Reviews
There are no reviews yet for this product.