Vulcan 2VK45AF PowerFry5™ (2) 45-50 lb. Fryers Gas Floor Fryer with Solid State Controls and KleenScreen PLUS® Filtration System, 120 Volts - 140,000 BTU
Chat Now
Vulcan 2VK45AF Specifications
Filtration System | KleenScreen PLUS® Filtration System |
---|---|
Series | PowerFry5™ |
Control Type | Solid State |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Battery | 2 |
Certifications | NSF |
BTU | 140,000 BTU |
Basket | Twin |
Basket Lifts | No |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Solid State |
Capacity | (2) 45-50 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 31 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 530.00 |
Additional Information on Vulcan 2VK45AF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 2VK45AF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 2VK45AF Description
For commercial kitchens that do a lot of deep-frying, a dual fryer system with fry tanks that hold 45-50 lbs each is an incredible piece of equipment that needs to be extremely reliable. The 2VK45AF PowerFry5™ Fryer from Vulcan offers this reliability while lowering operational costs with its energy-efficient heat transfer system and built-in filtration. These Commercial Deep Fryers are ENERGYSTAR® qualified and at the top of the list for the most efficient models available.
Gas-fired deep fryers have essentially used the same technology for the better part of a century, multiple burners each in their own heat exchange tube to apply heat to oil and expel the burned gas after a single pass. Vulcan’s FivePass™, as its name implies, uses a single large burner and two sets of heat exchange tubes with multiple bends to let the heat transfer to the oil evenly over five passes. This extracts as much heat from the burned gas as possible before it exits the fryer. With 68% cooking efficiency and 78% thermal efficiency, this fryer is much better than other fryers on the market at harnessing the heat of burning gas. This fryer features a SoftStart™ ignition system that only uses 35,000 BTU/hr of gas at start up to gradually heat oil without breaking it down which will extend its life. When this fryer is idle it only burns 4,251 BTU/hr of gas to maintain the cooking temperature.
This fryer uses a simple to use solid stat analog knob located behind the door to control the temperature between 200° and 390°F. To make using this fryer simple it features electronic ignition and fat melt modes.
To maintain the quality of the oil for extended periods, this fryer system has the KleenScreen PLUS® filtration system that utilizes a stainless steel mesh filter. The filtration system is kept inside an 18 gauge stainless steel filter vessel and particles down to .5 microns can be filtered out with the use of optional KleenScreen PLUS® filter envelopes. To make sure filtration is done as quickly as possible oil is circulated at a rate of 8 GPM by a ⅓ HP pump motor.
The fry tank and cabinet are made from durable stainless steel to make sure this fryer stands up to daily use without issue. The fryer is easy to keep level thanks to the adjustable 6” casters which are handy for cleaning and maintenance tasks. Other equipment supplied with this fryer include twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod.
A NEMA 5-15P cord and plug is included to connect the fryer to a 120 volt outlet and in total 140,000 BTU/hr of gas input is required.
Standard Features:
- Hi-limit shut-off.
- 70,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,251 BTU/hr. to save energy.
- Stainless steel fry tank, 45 - 50 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency.
- FRYMATE-VX15 add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 6 1⁄2"w x 13 1⁄4"d x 6"h.
- Single large basket - 13"w x 13 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
45 - 50 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK45A) (1VK45D) (1VK45C). 70,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 66% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,251 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 2VK45AF Accessories
Vulcan 2VK45AF Reviews
There are no reviews yet for this product.