Vulcan 2TR65DF PowerFry3™ (2) 65-70 lb. Fryers Gas Floor Fryer with Digital Controls and KleenScreen PLUS® Filtration System, 120 Volts - 160,000 BTU

For commercial kitchens that do a lot of deep-frying, a 2-fryer system with fry tanks that hold 65-70 lbs each is an incredible piece of equipment that needs to be extremely reliable. The 2TR65DF PowerFry3™ Fryer from Vulcan offers this reliability while lowering operational costs with its energy-efficient heat transfer system and built-in filtration. There are few Commercial Deep Fryers that come close to the energy efficiency of these ENERGYSTAR® qualified models.

With the ThreePass™ heat transfer system from Vulcan heat is evenly and efficiently applied to the oil with heat exchange tubes with two bends. Unlike the straight tubes in other fryers, Vulcan’s heat exchange system looks more like a sports car’s exhaust header which allows the heat generated by the burner to be applied to the oil for longer. This allows for more heat to be transferred to the oil without increasing gas consumption. This design yields 60% cooking efficiency and 72% thermal efficiency. To extend the life of the oil, this fryer features SoftStart™ which uses only 40,000 BTU/hr when warming up oil. At Idle this fryer only uses 5,083 BTU/hr to maintain the cooking temperature.

This fryer comes with digital controls with accurate temperature control from 200° to 390°F for fast recovery. Two count-down timer can be used to cook with either compensating time or actual time. Three melt modes, auto-boil-out mode, and electronic ignition make this fryer easy to use.

With the KleenScreen PLUS®, this fryer system has a stainless steel mesh filter to remove larger particles. However, to filter out particles down to .5 microns the optional KleenScreen PLUS® filter envelopes must be ordered. The filtration system is held inside a seamless 18 gauge stainless steel filter vessel. To make sure filtration is done as quickly as possible oil is circulated at a rate of 8 GPM by a ⅓ HP pump motor.

The cabinet and fry tank of this fryer is made from stainless steel for durability ad ease of maintenance. To make moving this fryer around for cleaning and maintenance as easy as possible it comes on adjustable 6” casters. For ease of use, it also comes with twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod.

To power this fryer it needs 80,000 BTU/hr of gas input and a 120v NEMA 5-15P cord and plug are included.