Vulcan 4TR45AF PowerFry3™ (4) 45-50 lb. Fryers Gas Floor Fryer with Solid State Controls and KleenScreen PLUS® Filtration System, 120 Volts - 280,000 BTU
Chat Now
Vulcan 4TR45AF Specifications
Filtration System | KleenScreen PLUS® Filtration System |
---|---|
Series | PowerFry3™ |
Control Type | Solid State |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Battery | 4 |
Basket | Twin |
Basket Lifts | No |
BTU | 280,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Solid State |
Capacity | (4) 45-50 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 62 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 871.00 |
Additional Information on Vulcan 4TR45AF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 4TR45AF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 4TR45AF Description
For commercial kitchens that do a lot of deep-frying, a four-fryer system with fry tanks that hold 45-50 lbs each is an incredible piece of equipment that needs to be extremely reliable. The 4TR45AF PowerFry3™ Fryer from Vulcan offers this reliability while lowering operational costs with its energy-efficient heat transfer system and built-in filtration. These energy-efficient Commercial Deep Fryers are at the top of the ENERGYSTAR® qualification list as some of the most efficient deep fryers available. If you’re in the market for Floor Model Gas Fryers you can’t go wrong with this offering from Vulcan.
At the heart of this fryer is the ThreePass™ heat transfer system which looks like the exhaust header on a high-performance car. The bends on the gas tube provide more surface area for heat transfer without needing to burn additional gas in the process. The groundbreaking design of the heat transfer system yields this fryer with 72% thermal efficiency and 60% cooking efficiency. To maintain the oil temperature at idle each fryer only uses 4,318 BTU/hr and to extend the life of oil the SoftStart™ ignition system lowers the burn rate to 35,000 BTU/hr to gradually apply heat.
The cooking temperature is easily adjusted with a simple analog knob behind the door which allows for temperatures from 200° to 390°F. For ease of use, this fryer has an electronic ignition and selectable fat melt modes.
With the KleenScreen PLUS®, this fryer system has a stainless steel mesh filter to remove larger particles. However, to filter out particles down to .5 microns the optional KleenScreen PLUS® filter envelopes must be ordered. The filtration system is held inside a seamless 18 gauge stainless steel filter vessel. To make sure filtration is done as quickly as possible oil is circulated at a rate of 8 GPM by a ⅓ HP pump motor.
Stainless steel construction of the cabinet and fry tank make sure cleaning and maintenance are as easy as possible. The fryer is easy to keep level thanks to the adjustable 6” casters which are handy for cleaning and maintenance tasks. Other equipment supplied with this fryer include twin fry baskets with plastic coated handles, a tank brush, and a clean-out rod.
To power this fryer it needs 280,000 BTU/hr of gas input and a 120v NEMA 5-15P cord and plug are included.
- Hi-limit shut-off.
- 70,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- 1 1⁄4" port ball type drain valve.
- Tank brush and clean-out rod.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,318 BTU/hr. to save energy.
- Stainless steel fry tank, 45 - 50 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy Efficient ThreePass™ heat transfer system yielding 60.9% cooking efficiency and 72% Thermal Efficiency. ENERGY STAR® qualified.
- FRYMATE-VX15 add-on frymate.
- Set of twin baskets – 6 1⁄2"w x 13 1⁄4"d x 6"h.
- 3⁄4" Flexible gas hose with quick disconnect.
- Single large basket – 13"w x 13 1⁄4"d x 5 1⁄2"h.
- 10" high stainless steel removable splash guard.
- Stainless steel tank cover – doubles as a work surface top.
- Connecting Kit(s) – Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
- 15 1⁄2"w x 34 3⁄8"d x 47 1⁄8"h. Working height 36 1⁄4".
- Natural Gas.
- Propane Gas.
- The 1TR45 Series fryer does not require any special adjustments for varying altitudes ranging from 0 - 10,000 feet for either Natural or Propane gas.
45 - 50 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1TR45A) (1TR45D) (1TR45C). 70,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with ThreePass™ heat transfer system. Energy Star® qualified. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,251 BTU/hr. to maintain cooking temperature. 1 1⁄4" port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 4TR45AF Accessories
Vulcan 4TR45AF Reviews
There are no reviews yet for this product.