Vulcan 3VK65CF PowerFry5™ (3) 65-70 lb. Fryers Gas Floor Fryer with Computer Controls and KleenScreen PLUS® Filtration System, 120 Volts - 240,000 BTU
Chat Now
Vulcan 3VK65CF Specifications
Control Type | Computer |
---|---|
Filtration System | KleenScreen PLUS® Filtration System |
Series | PowerFry5™ |
Cabinet | Stainless Steel |
Brand | Vulcan |
Energy Efficiency | Energy Star |
Fry Pot | Stainless Steel |
Made in | USA |
Certifications | NSF |
Battery | 3 |
Basket | Twin |
Basket Lifts | No |
BTU | 240,000 BTU |
Exterior Finish | Stainless Steel Front & Sides |
Controls | Computer |
Capacity | (3) 65-70 lb. Fryers |
Voltage | 120 Volts |
Width (in) | 63 |
Height (in) | 47.25 |
Depth (in) | 30.13 |
Weight | 916.00 |
Additional Information on Vulcan 3VK65CF
A PDF viewer is required to view this product's information.
Download Adobe Acrobat software
Vulcan 3VK65CF Certifications
NSF
This mark is your assurance that the product has been tested by one of the most respected independent certification organizations in existence today.
Vulcan 3VK65CF Description
For operators looking for a three-fryer system with fry tanks that each holds 65-70 lbs of oil, the Vulcan 3VK65CF PowerFry5™ Fryer is one of the best options on the market. This fryer system comes with a built-in filtration system and an efficient gas-fired heat transfer system that will keep operational costs as low as possible. These Commercial Deep Fryers are ENERGYSTAR® qualified and are among the most energy-efficient models you can buy. The Floor Model Gas Fryers offered by Vulcan are some of the most reliable units on the market with a wide array of features that make operation simple.
Most tube-fired fryers use multiple burners each in their own heat exchange tube. This evenly distributes heat but a lot of heat is wasted and is vented from the fryer immediately. Vulcan’s FivePass™ heat transfer takes a different approach, a single burner that branches off into two heat exchange tubes that bend back and forth to extend the length of the heat exchange tubes to heat oil evenly while harnessing more of the heat from the burned gas that would otherwise be unused. The design yields this fryer with 78% thermal efficiency and 68% cooking efficiency. To maintain the oil temperature at idle this fryer only uses 4,802 BTU/hr and to extend the life of oil the SoftStart™ ignition system lowers the burn rate to 35,000 BTU/hr to gradually apply heat.
The computer controls featured on this fryer make it as easy as possible for anyone to get consistent results with up to ten menu items. With a digital display showing the product names and cooking times, it’s simple for users to select the right menu item. Programming is easily done with a USB interface making it simple to update multiple fryers. Temperatures can be set from 200°F to 390°F with quick recovery and cooking can be based on actual time or compensating time. The electronic ignition and three melt modes on this fryer make it convenient to use.
The stainless steel mesh KleenScreen PLUS® filtration system in this fryer system is housed inside an 18 gauge stainless steel filter vessel. For additional filtration efficiency optional KleenScreen PLUS® envelopes are available to filter out particles down to .5 microns. Filtration time is kept to a minimum by a ⅓ HP pump that moves oil at 8 GPM.
This fryer is designed to stand up to the rigors of daily commercial use with a stainless steel cabinet and fry tank. The 6” casters included with this fryer make it easy to move around for maintenance and cleaning. The casters are also adjustable to make sure the fryer is always level. A tank brush, twin fry baskets with plastic coated handles, and a clean-out rod are also included.
The total gas input required by this fryer is 240,000 BTU/hr and it comes with a NEMA 5-15P cord and plug to connect it to a 120v outlet.
Standard Features:
- Hi-limit shut-off.
- 80,000 BTU/hr. input.
- Stainless steel cabinet.
- Electronic matchless ignition.
- Tank brush and clean-out rod.
- 1 1⁄4" full port ball type drain valve.
- One year limited parts and labor warranty.
- Set of four 6" adjustable (2 locking) casters.
- Twin fry baskets with plastic coated handles.
- Maintains idle temperature setting with only 4,802 BTU/hr. to save energy.
- Stainless steel fry tank, 65 - 70 lb. capacity. Includes 10 year limited tank warranty.
- Energy saving SoftStart™ ignition system extends oil life while requiring lower BTU’s.
- Energy efficient FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency. ENERGY STAR® certified.
- FRYMATE-VX15 add-on frymate.
- 3⁄4" Flexible gas hose with quick disconnect.
- Set of twin baskets - 9 1⁄4"w x 13 1⁄4"d x 6"h.
- 10" high stainless steel removable splash guard.
- Single large basket - 18 3⁄4"w x 13 1⁄4"d x 5 1⁄2"h.
- Stainless steel tank cover - doubles as a work surface top.
- Connecting Kit(s) - Connects two fryers together (brackets, grease strip and hardware included).
- Second year extended limited parts and labor warranty
65 - 70 lbs. capacity free standing gas fryer, Vulcan-Hart Model No. (1VK65A) (1VK65D) (1VK65C). 80,000 BTU/hr. input. Stainless steel cabinet. Set of four 6" adjustable casters (2 locking). Stainless steel fry tank with FivePass™ heat transfer system yielding 68% cooking and 78% thermal efficiency and “V” shaped cold zone. SoftStart™ ignition system using 35,000 BTU/hr. to extend oil life during start up. Idle rate of 4,802 BTU/hr. to maintain cooking temperature. 1 1⁄4" full port ball type drain valve. Twin fry baskets with plastic coated handles. Solid state analog knob control, digital, or programmable computer control systems all standard with electronic matchless ignition. Tank brush and clean-out rod included. CSA design certified. NSF listed.
NOTE! This is a general product line video and does not necessarily reflect the listed model.
Vulcan 3VK65CF Accessories
Vulcan 3VK65CF Reviews
There are no reviews yet for this product.