Nor-Lake KODB77612-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Outdoor +35°F Cooler, 6' x 12' x 7'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, membrane roof, CPB075PC-E-0, R290 Capsule Pak ECO Refrigeration, 115v/60/1-ph

Neither rain nor snow nor heat can beat the NorLake KODB77612-C 6' x 12' x 7'-7" H Kold Locker. This outdoor walk-in cooler is specifically designed to stand up to the elements to provide your business with refrigeration you can rely on. The interior of this walk-in coolers with top mounted compressor offers 418 cu. ft. of refrigerated space.

To achieve an R-value of 25 the 4" thick wall panels of this walk-in are constructed from foamed-in-place polyurethane insulation encased in 26 gauge steel. Both the interior and exterior sides of each panel feature an embossed stucco coating for resistance to corrosion. The Kold Locker is easy to assemble, yet extremely secure and durable. Each panel has male and female rails that fit together tightly and held in place with easy to use foamed-in-place cam locking fasteners. To make sure everything’s airtight, a continuous panel gasket that wraps around the exterior perimeter. Instead of using overlapping or mechanical fasteners, the ceiling and floor panels’ edge caps are foamed-in-place which will keep them secure for the life of the walk-in.

This walk-in unit comes with a standard door kit with a 26” wide door with a stepped profile that mechanically restricts airflow. This makes cooling the interior much more efficient. If you’re going to be regularly moving products in and out of the walk-in with a dolly you might want to upgrade to the 30” wide door kit that comes with a stainless steel kick plate. Making this change is free at the time of purchase. The door can have its two cam-lift hinges installed on either the right or left. These hinges are field-adjustable to make sure the door opens and closes smoothly while providing a secure seal. A spring-assisted door closer is included to make sure the door is never left ajar.

The door comes pre-installed in a 4’ wide panel section as a single unit complete with a perimeter heating wire (replaceable), A vapor proof LED lighting fixture controlled by a switch that also activates an external pilot light, magnetic stainless steel trim, and a digital thermometer. Everything inside is kept secure by an NL 9800 deadbolt locking handle that can also be locked with a more secure padlock. A safety release inside the walk-in prevents workers from getting trapped.

Cooling is provided by a ceiling-mounted RCPB075JC-E-4-EV Capsule Pak Refrigeration System producing 5812 BTU/hr that will maintain a temperature from 35°F to 38°F efficiently.  To set and maintain the temperature inside this walk-in the refrigeration system is controlled by the Enviro-Control™ unit. This is also the interface for setting the defrost timer and can also be used to manually start defrosting. To protect this walk-in from the weather white roof material made from a single piece of 35 mill membrane is included. This membrane is held in place with metal flashing to the side of the unit with TEK screws that are self-drilling and self-tapping.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)