Nor-Lake KODB8788-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Outdoor +35°F Cooler, 8' x 8' x 8'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, membrane roof, CPB075PC-E-0, R290 Capsule Pak ECO Refrigeration, 115v/60/1-ph

For enterprises that need to expand their refrigerated storage space but have limited indoor space, an outdoor walk-in cooler like the KODB8788-C 8' x 8' x 8'-7" H Kold Locker from Nor-Lake is an excellent option.

The 4” thick panels that make up this cooler are made from 26 gauge steel encasing foamed-in-place insulation to achieve an R-value of 25, Both sides of the 25 gauge steel feature an embossed stucco finish for corrosion resistance. The panels feature male and female rails to make aligning them easy during assembly while foamed-in-place cam locking fasteners make sure panels are secure. Panel gaskets on the outer perimeter of the panels provide a continuous seal. 800 lbs per square foot can be supported by the floor panels. The floor panels are constructed in a similar fashion to the wall panels but use rustproof aluminum instead of steel. Floor and ceiling panels use foamed-in-place edge caps that will keep everything secure for the life of the walk-in.

The standard door is 26” wide with a  stepped profile to provide a barrier to airflow for an energy-efficient door. The door opens and closes on two cam-lift hinges that are field adjustable to compensate for any sag over the years making sure the door always opens and closes smoothly while maintaining an airtight seal, A spring-loaded door closer is included to make sure the door is always fully closed which can prevent additional operational costs. To best fit your needs the door can be ordered with the hinges on the left or right side. The door comes pre-installed in a 4’ wide panel section as a single unit complete with a perimeter heating wire (replaceable), A vapor proof LED lighting fixture controlled by a switch that also activates an external pilot light, magnetic stainless steel trim, and a digital thermometer. Everything inside is kept secure by an NL 9800 deadbolt locking handle that can also be locked with a more secure padlock. A safety release inside the walk-in prevents workers from getting trapped.

The temperature inside the walk-in is maintained between 35°F and 38°F efficiently by the RCPB075JC-S-4-EV  Capsule Pak Refrigeration System on the roof producing 6250 BTU/hr of cooling. To Adjust the temperature inside, the Enviro-Control™ unit adjusts the amount of cooling provided by the refrigeration system. It can maintain the target temperature while minimizing power draw. This is also the interface used for adjusting the defrost timer and manually staring a defrost cycle. A weather protection kit is included with all outdoor models. 35 mill white membrane roof material is included and doesn’t need to be glued or seamed on top of the unit, instead, the roofing material is held in place with metal trim flashing secured by self-tapping/drilling TEK screws.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)