Nor-Lake KLF7788-C 8' x 8' x 7'-7" H Kold Locker Indoor Freezer with floor

Kold Locker™, Indoor -10°F Freezer, 8' x 8' x 7'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, KL2 QUALIFIER, CPF150PC-S-4, R290 Capsule Pak Refrigeration, 208-230v/60/1-ph

To efficiently store frozen items in bulk a walk-in freezer like the NorLake KLF7788-C 8' x 8' x 7'-7" H Kold Locker is your best bet. The interior of this walk-in has 372 cu. ft. of refrigerated space.

Each panel of this commercial walk-in freezer are 4” thick and comes with a corrosion-resistant embossed stucco finish on 26 gauge steel for durability. The interior is filled with EPA-compliant polyurethane foamed-in-place insulation. To make assembly simple, each panel has female and male rails that overlap each other for a mechanically air-tight design. Foamed-in-place cam locking fasteners make sure that panels lock together tightly for a truly air-tight seal. The corners are protected by a continuous panel gasket that goes around the outer perimeter without any cuts or breaks. Each ceiling and floor panel has foamed-in-place edge caps that can’t come loose compared to those that are overlapped or mechanically fastened.

The door that ships standard with this walk-in unit is 26” wide and comes with a stepped profile providing a barrier against airflow. This door comes with two hinges both of which are cam-lift and adjustable. This allows the door to be easily adjusted over the lifetime of the walk-in as it settles. The door also comes with a spring-assisted door closer to make sure it’s never left ajar. 

To make handling larger items easier a 30” wide door kit is available at no extra cost, it comes with a free stainless steel kick panel for added durability.

The door comes pre-hung in a 4’ wide panel with a replaceable perimeter heating wire, magnetic stainless steel trim, a digital thermometer, vapor proof LED lighting fixture and a switch with exterior indicator light. The door can be secured with an NL 9800 deadbolt locking handle with an independent key/padlock feature. To prevent workers from being locked inside, a safety release is included.

A temperature of -10°F keeps items inside this walk-in frozen safely with a top-mounted RCPF150JC-E-4-EV  Capsule Pak Refrigeration System producing 5692 BTU/hr of cooling. The Enviro-Control™ electronic controller system sets the temperature inside the walk-in and also sets the automatic defrost timer. To remove the need for a drain line, an automatic condensate vaporizer is shipped loose with the unit and needs to be field wired.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)