Nor-Lake KLB84614-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Indoor +35°F Cooler, 6' x 14' x 8'-4" H, floorless, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, CPB075PC-S-0, R290 Capsule Pak Refrigeration, 115v/60/1-ph

If you need a floorless indoor walk-in cooler with extra height, the KLB84614-C 6' x 14' x 8'-4" H Kold Locker from Nor-Lake is a great option.

The panels of the cooler consist of female and male rails that fit together and alignment properly during installation. Both sections feature polyurethane insulation that goes around the return bend inside the metal seams to provide a lightweight and strong panel. To maximize insulation each panel is 4 inches thick. To maintain an airtight seal, foamed-in-place cam locking fasteners are used. The interior and exterior panels are made from sturdy 26 gauge steel and feature a corrosion-resistant embossed stucco finish. This floorless cooler comes with NSF listed vinyl sealers to install the walls on for a secure seal.

The foamed-in-place gasket design patented by Nor-Lake uses a foamed-in-place gasket that is integral to the panel to make sure gaskets are fixed in place and don’t fall off during installation and shipment. For a superior seal, the panel gaskets go around the outer perimeter and corners of the panel without cuts or breaks. The ceiling panels have edge caps with foamed-in-place insulation to make sure they don’t come loose and the end caps stay put throughout the service life of the cooler.

This walk-in cooler comes standard with a 26” wide door but an upgraded 30” one can be included with no extra cost. The larger door comes with a stainless steel kick plate making it more durable. This wider door makes it easier to move wider items inside without too much fuss. The door is made from foamed-in-place insulation clad with metal with an overall thickness of 4”. The door also has a stepped profile that reduces airflow for better insulation.

The door comes with two field-adjustable cam-lift hinges and can open from the left or right. The hinges are spring-loaded to automatically close the door to minimize the entry of warm air. The door handle is locking with an NL 9800 deadbolt with an independent key/padlock to secure items inside. A safety release inside the unit makes sure no one gets stuck inside.

The door comes pre-hung in a 4-foot wide frame panel featuring a replaceable heater wire. The door section also comes with a stainless steel trim that is magnetic, a digital thermometer, a switch with an exterior indicator light, an LED lighting fixture, and a digital thermometer. Everything comes pre-wired into the door section concealed inside a conduit in the door frame panel. 120/60/1-ph power is supplied to a junction box mounted on the surface inside the walk-in above the LED lighting fixture inside the interior frame.

The top-mounted RCPB100JC-S-4-EV Capsule Pak™ reliably produces 8484 BTU/hr of cooling with its 1 HP compressor. The cooling system comes from the factory precharged with high-efficiency R-449A refrigerant. 208/230 power is used by the Capsule Pak refrigeration system.

The condensing unit and evaporator are shipped separately and easy to join together in the field thanks to quick-connect fittings. The flush coil design keeps components outside maximizing the available storage space. High-efficiency EC evaporator fan motors circulate cool air inside the to evenly maintain a temperature between 35°F and 38°F.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)