Nor-Lake KLB7466-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Indoor +35°F Cooler, 6' x 6' x 7'-4" H, floorless, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, KL2 QUALIFIER, CPB050PC-S-0, R290 Capsule Pak Refrigeration, 115v/60/1-ph

Does your business need a dependable floorless walk-in cooler? The KLB7466-C 6' x 6' x 7'-4" H Kold Locker from NorLake might be just what you’re looking for. With more than 168 cu. ft. of total space, this walk-in coolers with top mounted compressor provides operators with options.

For superior insulation, each panel is 4” thick with foamed-in-place polyurethane insulation that is EPA-compliant. The interior and exterior sides of the panel feature 26 gauge steel with a corrosion-resistant embossed stucco finish. Connecting panels together is easy with female and male rails that provide a perfect fit that allows the foamed-in-place cam locking fasteners to fully tighten to make an airtight connection. Around the outer perimeter, a continuous panel gasket provides a barrier that is free from cuts or breaks. The ceiling panels on this unit have edge caps that are foamed-in-place rather than mechanically fastened to prevent them from coming loose.

Kold Locker walk-in units come standard with a 26” wide door, This door is designed with a stepped profile that acts as a barrier decreasing airflow for better energy-efficiency. The door can have its two cam-lift hinges installed on either the right or left. These hinges are field-adjustable to make sure the door opens and closes smoothly while providing a secure seal. A spring-assisted door closer is included to make sure the door is never left ajar.

If you’re going to be regularly moving products in and out of the walk-in with a dolly you might want to upgrade to the 30” wide door kit that comes with a stainless steel kick plate. Making this change is free at the time of purchase.

The door panel is 4’ wide with the door pre-hung from the factory. A replaceable perimeter heating wire is included as well as a vapor proof LED lighting fixture that is activated by a switch complete with an exterior indicator light, a digital thermometer, and magnetic stainless steel trim. The interior is secured with an NL 9800 deadbolt handle with an independent key/padlock feature. To keep workers safe, the interior has a safety release to make sure they are never locked in.

To keep items inside between 35°F and 38°F this walk-in features the RCPB050JC-S-0-EV Capsule Pak Refrigeration system that produces 4060 BTU/hr. The Enviro-Control™ electronic controller system sets the temperature inside the walk-in and also sets the automatic defrost timer. To remove the need for a drain line, an automatic condensate vaporizer is shipped loose with the unit and needs to be field wired.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)