Nor-Lake KLB77812-C Walk-In Cooler & Top Mounted Compressor

Kold Locker™, Indoor +35°F Cooler, 8' x 12' x 7'-7" H, with floor, 26 gauge embossed coated steel interior & exterior finish, self-closing door, locking deadbolt handle, CPB075PC-S-0, R290 Capsule Pak Refrigeration, 115v/60/1-ph

For businesses that need a large amount of refrigerated space, a walk-in unit like the KLB77812-C 8' x 12' x 7'-7" H Kold Locker from NorLake is an excellent option. The 574 cu. ft. interior of this walk-in coolers with top mounted compressor provides users with refrigerated storage options.

The panels of this cooler are 4” thick with foamed-in-place polyurethane insulation. The exposed sides of each panel are made from 26 gauge steel coated with corrosion-resistant embossed stucco. Assembling a Kold Locker walk-in is simple with each panel featuring female and male rails that mate together. Once mated together the panels are fully tightened with foamed-in-place cam locks which assure an airtight connection. The corners are kept sealed with panel gaskets that go around the outer perimeter without any breaks or cuts. The edge caps on the ceiling panels are not overlapped or mechanically fastened, instead, they are foamed-in-place so they don’t come loose.

This walk-in unit comes standard with a 26” wide door featuring a stepped profile that acts as a barrier against airflow. A 30” wide door kit with a stainless steel kick plate is available as a free upgrade. The two hinges can be installed on the right or left of the door and include field-adjustable cam-lifts with a locking set screw. A spring-actuated door closer makes sure it’s never left ajar to keep cooling costs low. The door comes pre-hung on a 4’ wide panel complete with a vapor proof LED light controlled by a switch connected to an exterior indicator light, magnetic stainless steel trim, a replaceable perimeter heating wire, and digital thermometer. Items inside are kept secure by the NL 9800 deadbolt handle that comes with an independent key/padlock feature. To keep workers from getting locked inside the walk-in a safety release is included.

The temperature inside this walk-in is kept between 35°F and 38°F by the ceiling-mounted RCPB075JC-S-4-EV Capsule Pak Refrigeration System that produces 6250 BTU/hr of cooling potential. Adjusting the temperature inside is made simple by the Enviro-Control™ electronic controller system. This is also used for manual defrost and setting an automatic defrost timer. A field-wired automatic condensate vaporizer is included (shipped loose) to eliminate the need for drain lines.

• STANDARD MODELS SHIP THE SAME DAY
• DOE compliant
• USDA accepted
• Magnetic gasket
• 15 year panel warranty
• Cooler or freezer models 
• Indoor or outdoor models
• 26" wide, self-closing door
• CN UL flame spread listed
• Perimeter door heater wire
• Floor double sweep gasket
• Spring actuated door closer
• Sizes from 4' x 6' to 10' x 14'
• Two temperatures: +35°F, -10°F
• 18 months parts & labor warranty
• Digital thermometer and light switch
• Heavy duty adjustable cam-lift hinges
• Three heights: 6'7" & 7'7" with floor; 7'4" floorless
• Air-cooled condensing unit (wall mount - 10 day ship)
• Smooth aluminum interior floor (on models with floor)
• Floorless models supplied with NSF listed vinyl sealers
• Oregon State listed, City of Houston listed & California State listed
• Automatic condensate vaporizer. No drain line required on indoor units
• Capsule Pak™ refrigeration system (ceiling or wall mount) (ordered separately)
• Full 4" thick panels foamed-in-place with EPA-compliant polyurethane insulation
• Deadbolt locking handle with independent key/padlock feature and inside safety release
• Time clock or electronic control provided for automatic defrost on both coolers and freezers
• 26 gauge corrosion resistant stucco embossed coated steel on all surfaces except interior floor
• NSF, UL flame spread 25 or less on all foam cores; UL and CSA electrical listing on door sections
• UL, C-UL listing on complete Capsule Pak™ refrigeration systems (see page 11 for listed components)
• High output low profile LED light positioned above the door to prevent interference with shelving or product

• Hot gas condensate vaporizer available on many models

• Refrigeration hood
• -20°F ambient controls
• White membrane roof and trim

• Exterior ramp
• Electric vaporizer
• Floor tread plate kit
• U-shaped shelving system
• Door hood (outdoor models)
• Five year compressor warranty
• Condensing unit air deflector kit
• Heights: 8'7" with floor, 8'4" without floor
• Leak detector/alarm (may be a requirement in some areas)
• Heater kit for outdoor use where ambient conditions may go below 32°F
• Note: (Most options are available two weeks from receipt of order. Please contact us for specific questions)